Elenberg PRT-9050 - Инструкция по эксплуатации - Страница 28

Operation instructions

28

Operation modes

1. Selecting mode

Each time 

MODE

button is pressed, the operation mode is changed in sequence:

2. FAN mode

Each time the «FAN» button is pressed, the fan speed is changed in sequence:

At «FAN ONLY» mode, only «High» and «Low» are available. At «DRY»
mode, airflow is set at «Low» automatically, «FAN» button is ineffec+
tive in this case.

3. Setting temperature

Press once to

raise 

temperature setting by 1°C (2°F)   

Press once to

lower

temperature setting by 1°C (2°F)   

Turning on

Press 

button, when the appliance receives the signal, the RUN

indicator of the air conditioner lights up.

HEATER (SUPER), SMART, DRY, TIMER ON and TIMER OFF operation modes will be specified in
the following pages.

Changing modes during operation, sometimes the unit does not respond at once. Wait 3 minutes. 
Wait 3 minutes before restarting the appliance.

smart

cooling 

dry 

fan only

Auto

High 

Low 

unable to set

room temperature ±2°C (4°F)

18°C (64°F) ~ 32°C (90°F)

Range of available set temperature