Elenberg PRT-9050 - Инструкция по эксплуатации - Страница 29

Operation instructions 

29

Cooling mode

If you want to cool the room, you can operate the appliance as follows:
1.  Press 

MODE

button and select cooling mode.

2.  Press 

FAN

button to select the fan speed you need.

3.  You also can set the appropriate temperature by using the temperature button.
4.  When all the above is done, you can press ON/OFF button to make the appliance run with cool+

ing mode.

5.  You can adjust the fan direction by pressing swing button, press once for swing, and press again

to stop.

DRY mode

The appliance also gives you the function of drying.
1.  Press 

MODE

button and press select dry mode.

2.  You can set the appropriate temperature by using the temperature button.
3.  Press 

ON/OFF

button to make the appliance run with dry mode.

4.  You can adjust the fan direction by pressing 

SWING 

button, press once for

swing, and press again to stop.

Note:  

Dry mode cannot be used to cool the room.
It requires hot air outlet hose in Dry mode.
In dry mode, fan speed is preset by appliance, so fan button is not appli+
cable.

Additional introductions

1.  If you select cooling or dry mode while appliance is in another mode, the compressor will be

delay+protected. Wait for 3~5 minutes, the appliance will run again. Do not press any button
during the waiting time, or the appliance will re+count the protected time.

2.  In cooling or dry mode, when the room temperature is up to set the temperature, the compres+

sor will stop running, and fan only is at rest.