Elenberg PRT-9050 - Инструкция по эксплуатации - Страница 30

Operation instructions 

30

SMART mode

Press the 

SMART

button, the unit enters smart mode(fuzzy logic operation)

directly whether the unit is on or off. In this mode, temperature and fan speed
are automatically set based on the actual room temperature.
Press the

FAN

button in smart mode, if the appliance is in cooling mode, fan

speed changes in turns: Auto+High+Low; if the appliance is in dry mode, the
LCD displays as figure on the right, but in fact, there is Auto+speed only.

Operation mode and temperature are determined by indoor temperature

Cooling only models

SMART button is in effective in SUPER mode

Note: 

Temperature, airflow and direction are controlled automatically in SMART mode. However, a

decrease or rise of up to 1°С (2°F) can be set with the remote controller or control panel if you still
feel uncomfortable.

Indoor temperature

Operation mode

Target temperature

26°C (79°F) or below

Room temperature decrease 1.5°C
after operate for 3 minutes

Over 26°C (79°F)