Кондиционеры Cooper&Hunter CH-IDH100PNK - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.

DC Inverter Duct Type Unit
46
3.4 Check after Installation
Check Items after Installation
Check items
Possible events due to improper
insta
l
lation
Is the main body installed securely?
The unit may fall down, vibrate or produce
noise.
Did you do water leakage test?
Cooling capacity may become
unsatisfactory.
Is the unit well insulated from heat?
Condensate, water drops may occur.
Does water drainage go well?
Condensate, water drops may occur.
Is the voltage consistent with that
stated on the nameplate?
The unit may fail or its components may
get burned.
Are the wires and pipes installed
correctly?
The unit may fail or its components may
get burned.
Has the unit been safely grounded?
Risk of electric leakage.
Do the specifications of wires comply
with the requirement?
The unit may fail or its components may
get burned.
Is there any obstacle blocking the air
inlet and outlet of the indoor or
outdoor units?
Cooling capacity may become
unsatisfactory.
Have you recorded the length of
refrigerant pipe and the refrigerant
charging amount?
The refrigerant charging amount can’t be
controlled.
3.5 Test Running
Preparation before connecting the power:
(1)
Power must not be connected if the installation work is not completed.
(2)
Control circuit is correct and all the wires are firmly connected.
(3)
Cut-off valves of the gas pipe and liquid pipe are open.
(4)
The inside of the unit should be clean. Take irrelevant objects out if there
is any.
(5)
After checking, re-install the front side plate.
Operation after connecting the power:
(1)
If all the above works are finished, power on the unit.
(2)
If the outside temperature is more than 30°C, heating mode can’t be
Характеристики
Остались вопросы?Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)