Кофеварка Siemens TK 52001 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
12
12
S
on
Run the service programme
(see “Service programme“)
S
lashing Service programme in
operation
J
lashing Turn dial to
g
/
h
.
J
on
Turn dial to O.
Settings and displays
Setting the water hardness
It is important that the water hardness be
set correctly, so that the appliance indicates
accurately when the descaling programme
should be run. The factory setting is a water
hardness of 4.
You can check the water hardness by
asking your local water supplier.
Degree Water hardness
German (°dH) French (°fH)
1
2
3
4
1-7
8-15
16-23
24-30
1-13
14-27
28-42
43-54
● Switch the appliance to standby.
● Hold down the steam button
h
for at
least 5 seconds. The number of LEDs 7a
H
, b
I
, c
S
, d
J
that light up indicates
the selected water hardness.
● Press the steam button
h
repeatedly
until the correct number of LEDs is lit; e.g.
for a hardness of 3, the LEDs 7a, b and c
(
H
,
I
,
S
) light up.
● Press the standby button
a
once. The
selected number of LEDs should light
up briely; this indicates that the desired
setting has been saved successfully.
If a water ilter (optional extra Order No.
461732) is used, the water hardness should
be set to 1.
Note: If no button is pressed within 90
seconds, the appliance switches to stand-
by mode without saving the new settings.
In this case, the previous water hardness
setting is retained.
The appliance must be rinsed when a ilter
is irst used and after changing the ilter.
● Fill the tank with water up to the 0.5 l
mark.
● Place a suitable container (approx. 0.5 l)
under the nozzle 8.
● Set the dial
6 to
g
/
h
.
● When water stops coming out of the
nozzle 8, set the dial back to O.
● Fill the water tank and the water pipes
(see “Switching on the appliance / Filling
the system“).
Adjusting the grinding unit
Sliding switch 15 adjusts the degree of
grinding, from coarse to ine.
Warning
Adjust the grinding unit only while it is
running! Other wise the appliance may be
damaged.
● Press the strong coffee button
K
.
● While the grinding unit is running, move
the sliding switch 15 to the desired po-
sition: the smaller the dots, the iner the
grind.
i
The new setting will not become apparent
until the second or third cup is brewed.
Tip: For dark roast coffee beans, choose a
coarser grind; for light roast beans, select a
iner grind.
Float
The loat
19 in the water tray 18 shows
when the tray needs emptying.
● If the loat
19 is clearly visible, empty the
water tray 18.
en
en
