Krups EA 829810 - Инструкция по эксплуатации - Страница 14

Descaling programme - duration: around 22 minutes

If your product is fitted with our Claris - Aqua Filter System F088 cartridge, please remove this cartridge before the 

descaling operation.

The amount of limescale collected depends on the hardness of the water used. The appliance will warn you by periodically 

displaying a message when it is time to carry out descaling.

To carry out a descaling programme, you will require a container with a capacity of at least 0.6 L and a KRUPS F 054 (40 g) 

descaling sachet 

(35).

When the message “Descaling necessary” is displayed, you can start the automatic descaling programme by pressing the 

PROG 

button.

Carefully follow the instructions given on the screen, ensuring that the contents of the sachet have dissolved.

The descaling cycle is divided into three parts: the descaling phase itself, followed by two rinsing phases. 

Use only KRUPS descaling products. Descaling products are available from KRUPS After-Sales Service centres.

We accept no responsibility for damage caused to the appliance by the use of other products.

If the appliance is dropped while not in its packaging, it is recommended that you take it to an approved repair centre to avoid 

any risk of fire or electrical problems.

If a power failure takes place or if you unplug your machine, the cycle will continue from the current phase when the power 

is returned. It will not be possible to cancel this operation.

Ensure that the descaling programme has been completed to avoid any risk of poisoning. The descaling cycle is an intermittent 

cycle. Do not put your hands beneath the steam nozzle during the cycle.

Ensure that you protect your worktop during descaling cycles, particularly if it is made of marble, stone or wood.

CAPPUCCINO SYSTEM CLEANING

To carry out a cleaning programme, you will require 

a container with a capacity of at least 0.6 L and KRUPS XS 4000 

cleaning liquid (36).

Turn the cappuccino system's lid button to the position 

CLEAN (25).

You can start the cleaning cycle by pressing the button 

PROG 

► 

Maintenance 

► 

Cappuccino cleaning.

Follow the instructions on the screen.

MANUAL MAINTENANCE OF THE CAPPUCCINO SYSTEM

To disassemble the system,

 follow the following instructions:

Remove the flexible pipe from the jug opening and the drinks outlet 

(37)

.

•  Unlock the system from the machine 

(38)

.

•  Remove the accessory cassette 

(39)

.

•  Remove the black silicone body of the cassette 

(40)

.

•  Remove the air nozzle: this is the metal piece located above the black silicone body. 

(41)

.

•  Also remove the plastic piece 

(42)

.

The cappuccino system is now completely disassembled 

(43)

.

•  Take the disassembly key 

(44)

•  Unscrew the end of the steam nozzle 

(45)

•  If necessary, unblock using the needle provided for this purpose 

(46)

You can also remove the milk inlet pipe together with the lid setting button 

(47)

.

Once the elements have been cleaned with warm water and dried, put them back in place and replace the cassette on the jug.

General maintenance

Always remove the mains power cord from the electrical socket and allow the appliance to cool before cleaning it. 

Do not use utensils or products likely to scratch or corrode the appliance.

Wipe the outside of the appliance with a damp cloth.

Rinse the water tank with clean water.

These parts are not dishwasher safe.

OTHER FUNCTIONS: PROG BUTTON

You access the menu with the appliance's other functions by means of the 

PROG 

button from the drinks selection screen. For 

all settings, the rotating button enables you to navigate through the menus and options and to confirm a choice, while the 

PROG 

button enables you to cancel a selection and return to the drinks selection menu.

Maintenance

Enables you to access the various maintenance 

options.

PROG

Settings

Enables you to access the various settings 

options.

Product information

Enables you to access product information.

Exit

Takes you back to the previous menu.

MAINTENANCE

All of these options enable you to start the selected programmes. You should then follow the on-screen instructions.

MAINTENANCE

Rinsing

Enables you to access the rinsing operations.

Coffee cleaning

Enables you to access the cleaning operations.

Filter

Enables you to access filter mode.

Exit

Takes you back to the previous menu.

Cappuccino cleaning

Enables you to access the cappuccino system 

cleaning operations.

SETTINGS

SETTINGS

Language

You can select the language of your choice from those offered.

Screen contrast

You can adjust the screen contrast according to your preferences.

Date

You must set the date, particularly when you are using an anti-limescale 

cartridge.

Clock

You can select to display a 12 or 24-hour clock.

Auto-off

You can select the length of time after which your appliance will switch off 

automatically. 

From 30 minutes to 4 hours, in 30 minute segments.

Auto-on

You can automatically start pre-heating of the appliance at a selected 

time.

Automatic rinsing

You can automatically start rinsing of the appliance when it is switched on.

Volume unit

You can set the unit of measurement to be ml or oz.

Water hardness

You must set the hardness of your water between 0 and 4. See the 

section “Measuring the water hardness”.

Coffee temperature

You can adjust the temperature of your espresso or coffee to one of three 

levels.

Exit

Takes you back to the previous menu.

27

EN

26