Siemens TK 76201 - Инструкция по эксплуатации - Страница 40

36

de

en

Rinse all parts with clear water and dry 
them.
Reassemble all the parts and replace fully 
in the appliance.

Note: 

All the parts of the milk frother 

10

 can 

also be put in the dishwasher.

Cleaning the brewing unit 24  
(refer also to the quick reference guide)

In addition to the automatic cleaning 
programme, the machine offers the option 
of removing the brewing unit 

24

 for 

cleaning.

Switch to the “energy saving mode” with 
the 

a

 button 

2

.

Switch the appliance off completely at the 
power on/off switch 

1 O

 / 

I

; no buttons  

are lit.
Slide the door opener 

23

 to the right and 

open the door 

22

 to the brewing unit 

24

.

Slide the red lock 

24b

 on the brewing unit 

24

 completely to the left.

Press the red button 

24a

, grasp the 

brewing unit 

24

 by the recessed grips 

(

Fig. E

) and remove carefully.

Rinse the brewing unit 

24

 under running 

water.

Important: 

Clean without detergent and do 

not place in the dishwasher.

Wipe out the inside of the appliance with 
a damp cloth.
Allow the brewing unit 

24

 and the inside 

of the appliance to dry.
Reinsert the brewing unit 

24

 fully into the 

appliance.
Slide the red lock 

24b

 fully to the right 

and close the door 

22

.

●

●

●

●

●

●

●

●

●

●

●

●

Storing accessories

The espresso machine has special com-
partments for storing the accessories and 
quick reference guide inside the appliance.

To store the measuring spoon 

14

, milk 

pipe 

10d

 and tube 

10c

, remove the water 

 tank 

11

 and insert the parts in the shaped 

recesses 

13

.

The quick reference guide has its own 
compartment by the brewing unit 

24

.

Open the door 

22

 to the brewing unit.

Grasp the red cover 

26

 to the storage 

compartment 

25

 by the tab and remove.

Stow away the quick reference guide, 
replace the cover 

26

 and close the door 

to the brewing unit 

22

Tips on energy saving

The fully automatic espresso machine 
switches to “energy saving mode” 
automatically after one hour (factory 
setting). The appliance uses very little 
power in “energy saving mode”. The 
default time of one hour can be altered: 
(see Menu settings, “

A

UTO

OFF

AF TER

”) . 

If the appliance is not being used, switch 
it off at the power on/off switch 

1

O

 / 

I 

on 

the front.
If possible, do not interrupt coffee or milk 
froth dispensing. Cutting the coffee or 
milk froth dispensing process short 
results in higher energy consumption and 
in more residual water collecting in the 
drip tray.
Descale the appliance regularly to avoid a 
build-up of limescale. Limescale residue 
results in higher energy consumption.

●

●
●

●

–

–

–

–

SE_TK76_Teil_1_080917.indd   36

18.09.2008   08:40:49