Кофемашина Bosch TCA 5309 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
16
Robert Bosch Hausgeräte GmbH
en
Using coffee beans
This fully automatic espresso / coffee
machine grinds beans freshly for each
brew. If possible, use only beans for fully
automatic coffee and espresso machines.
Deepfreeze or store in a cool place in
sealed, airtight containers. Coffee beans
can be ground while frozen.
Important:
Fill the water tank with fresh
water every day. The tank must always
contain suficient water for operating the
appliance. Do not allow it to become empty.
Tip:
Prewarm cups, especially small, thick
espresso cups, by placing on the cup shelf
14
or rinsing with hot water.
The appliance must be ready for use.
● Place the prewarmed cup(s) under the
coffee outlet
9
.
● Depending on the amount of coffee
required, press either dispensing button
3
E
or
4
F
. The coffee is brewed and
then dispensed into the cup(s).
● The appliance automatically stops
dispensing the coffee as soon as the set
quantity has been reached.
i
The brewing process can be terminated
at any time by pressing the coffee
dispensing button
3
E
or
4
F
.
Extra coffee
It is possible to dispense the same amount
of coffee a second time.
● Press the dispensing button
3
E
or
4
F
once again within 3 seconds
of
brewing.
Note:
The second cup is brewed using the
previously ground coffee.
Changing volume
dispensed
The preset quantities for dispensing button
3
E
(approx. 40ml) and dispensing button
4
F
(approx. 125 ml) can be changed.
● Press and hold the coffee dispensing
button
3
E
or
4
F
until the desired
volume of coffee has been delivered
(range approx. 30 – 220 ml).
i
The quantity can be changed again at
any time. By pressing “Reset”, the factory
settings are restored.
Reset:
The appliance must be ready for
use.
● Pull out trays
17
and
18
. Press and hold
dispensing buttons
3
E
and
4
F
at the
same time for at least 5 seconds.
● The LEDs
7a, b, c
and
d
(
H
,
I
,
S
,
J
)
lash briely as conirmation.
● Reinsert trays
17
and
18
.
The standard factory settings have now
been reactivated.
Preparing hot water
The appliance must be ready for use.
This function allows water to be heated for
a cup of tea, for example.
¡
Risk of burns
The nozzle gets very hot. Do not touch the
metal parts.
● Place an appropriate cup under the
nozzle
8
.
● Push the sleeve on the nozzle
8
all the
way
down
.
● Turn the dial
6
to
g
/
h
.
¡
Risk of scalding
When the dial is set to
g
/
h
, the nozzle
may sputter a little. Do not touch the nozzle
8
or point it at anyone.
● End the process by turning the dial
6
back to “
O
”.
