Eaton 5PX 1000 - Инструкция по эксплуатации - Страница 30

614-40094-00

30

1.
2.

1.
2.

The number of Extended Battery Module is automatically detected, or can be set manually in number of EBM or in 
Ah.

Deep discharge protection

This setting is recommended to avoid damaging the battery. Warranty is void if deep discharge protection is 
disabled.

7.7  Retrieving the event log

To retrieve the event log through the display:

Press any button to activate the menu options, then select event log.
Scroll through the listed events.

7.8  Retrieving the fault log

To retrieve the fault log through the display:

Press any button to activate the menu options, then select fault log.
Scroll through the listed faults.

8  UPS maintenance

8.1  Equipment care

For the best preventive maintenance, keep the area around the equipment clean and dust free. If the atmosphere is very 
dusty, clean the outside of the system with a vacuum cleaner.

For full battery life, keep the equipment at an ambient temperature of 25 °C (77 °F).

The batteries are rated for a 3-5 year service life. The length of service life varies, depending on the frequency of usage 
and ambient temperature (life divided by 2 each 10 °C above 25 °C).

If the UPS requires any type of transportation, verify that the UPS is turned off.

Batteries used beyond expected service life will often have severely reduced runtimes. Replace batteries at least every 4 
years to keep units running at peak performance.

Batteries runtime will be reduced at low temperature (below 10 °C).

8.2  Storing the equipment

If you store the equipment for a long period, recharge the battery every 6 months by connecting the UPS to utility power. 
The internal batteries charge to 90% capacity in less than 3 hours. However, Eaton recommends that the batteries charge 

for 48 hours after long-term storage.

Check the battery recharge date on the shipping carton label. If the date has passed and the batteries were never 

recharged, do not use them. Contact your service representative.