Smeg SBS8004AO - Инструкция по эксплуатации - Страница 10

9 / 32  EN

Refrigerator / User Guide

Installation

4. 

Attach the connector into the faucet adaptor 
and tighten by hand / tool.

2. 

Connect the other end of the water hose to 
the water pump by pushing the hose into the 
pump’s hose inlet.  

5. 

To avoid damaging, shifting or accidentally 
disconnecting the hose, use the clips provided 
to fix the water hose appropriately.

A

WARNING: 

After turning the faucet 

on, make sure there is no water leak on 
either end of the water hose. In case of 
leakage, turn the valve off and tighten 
all connections using a pipe wrench or 
pliers. 

3.8. For products using water carboy

(Optional)

To use a carboy for the product’s water 
connection, the water pump recommended by the 
authorized service must be used. 

1. 

Connect one end of the water hose provided 
with the pump to the product (see 3.6) and 
follow the instructions below.

3. 

Place and fasten the pump hose inside the 
carboy.

4. 

Once the connection is established, plug in 
and start the water pump.

C

Please wait 2-3 minutes after starting 
the pump to achieve the desired 
efficiency.

C

See also the pump’s user guide for 
water connection.

C

When using carboy, water filter is not 
required.

3.9 Water filter

(Optional)

The product may have internal or external filter, 
depending on the model. To attach the water filter, 
follow the instructions below.