Холодильник Liebherr CBNPes 3976 Premium - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
A bubbling and gurgling noise.
→
This noise comes from the refrigerant flowing in the refriger-
ation circuit.
u
The sound is normal.
A quiet clicking noise.
→
The noise is produced whenever the refrigeration unit
(motor) automatically switches on or off.
u
The sound is normal.
A hum. It is briefly a little louder when the refrigeration
unit (the motor) switches on.
→
The refrigeration increases automatically when the Super-
Frost, function is activated, fresh food has just been placed
in the appliance or the door has been left open for a while.
u
The sound is normal.
→
The refrigeration increases automatically when the Super-
Cool function is activated, fresh food has just been placed
in the appliance or the door has been left open for a while.
u
The sound is normal.
→
The ambient temperature is too high.
u
A low hum.
→
The sound is produced by air flow noise of the fan.
u
The sound is normal.
Vibratory noise.
→
The appliance is not standing firmly on the floor. As a result,
adjoining units or objects are set into vibration by the
running refrigeration unit.
u
Move the appliance away a little and align it using the
adjustable feet.
u
Move bottles and containers apart.
Hum of the water tank pump.
→
When water is pumped out of the water reservoir, a brief
hum of the pump can be heard.
u
The sound is normal.
The temperature display indicates:
F0
to
F9
→
There is a fault.
u
Contact the customer service. (see Maintenance).
The temperature display reads:
FE
→
There is a fault.
u
Contact the customer service. (see Maintenance).
The temperature display indicates power failure
. The
warmest temperature reached during the power failure
appears in the temperature display.
→
The freezer temperature rose too high over the last hours or
days due to a power failure or power interruption. When the
power interruption is over, the appliance will continue to
operate in the last temperature setting.
u
To cancel the display of the warmest temperature: press
alarm button
Fig. 3 (8).
u
Check the quality of the food. Do not consume spoiled food.
Do not re-freeze thawed food.
DEMO shines in the temperature display.
→
The demo mode is activated.
u
Contact the customer service. (see Maintenance).
The outside surfaces of the appliance are warm.
→
The heat of the refrigeration circuit is used to prevent
condensate from forming.
u
This is normal.
The IceMaker cannot be switched on.
→
The appliance and therefore the IceMaker are not
connected.
u
Connect the appliance. (see Putting into operation).
The IceMaker does not make any ice cubes.
→
The IceMaker is not switched on.
u
Switch on the IceMaker.
→
The drawer of the IceMaker is not properly closed.
u
Close the drawer properly.
→
The water tank is not correctly inserted.
u
Insert the water tank.
→
There is not enough water in the water tank.
u
Fill the water tank.
The LED of the IceMaker flashes.
→
There is not enough water in the water tank.
u
Fill the water tank.
→
If the LED flashes and the water tank is full, the IceMaker is
defective.
u
Contact the customer service. (see Maintenance).
The temperature is not cold enough.
→
The door of the appliance is not properly closed.
u
Close the door of the appliance.
→
Insufficient ventilation.
u
Clear ventilation grilles.
→
The ambient temperature is too high.
u
→
The appliance was opened too frequently or for too long.
u
Wait until the appliance reaches the required temperature
itself. If not, contact the customer service. (see Mainte-
nance).
→
Too much fresh food was placed inside without SuperFrost.
u
→
The temperature is incorrectly set.
u
Set to a colder temperature and check after 24 h.
→
The appliance is too close to a heat source.
u
Solution: (see Putting into operation).
The interior light is not on.
→
The appliance is not switched on.
u
Switch on the appliance.
→
The door was open longer than 15 min.
u
The interior light automatically switches off if the door has
been open for about 15 min.
→
If the interior light is not on but the temperature display is lit,
the bulb is faulty.
u
Change the bulb. (see Maintenance).
8 Decommissioning
8.1 Switching off the appliance
Note
u
To switch off the entire appliance it is necessary only to
switch off the freezer compartment.
8.1.1 Switching off the freezer compartment
u
Press On/Off button, freezer compartment
Fig. 3 (6) for
about 2 s.
w
The temperature displays are dark. The appliance is
switched off.
8.1.2 Switching off the refrigerator compart-
ment with BioFresh compartment
Note
u
The refrigerator compartment can be switched off sepa-
rately, if required.
u
Press On/Off button, refrigerator compartment
Fig. 3 (1) for
about 2 s.
Decommissioning
16
Характеристики
Остались вопросы?Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)
