Bertazzoni REF905BBRPTT - Инструкция по эксплуатации - Страница 80

80

11.1  Troubleshooting Guide

If you notice any malfunctioning of your appliance, 

use this guide before calling for service.This guide 

can help you to solve the problem on your own or 

could provide important information that you can 

convey to the Service technician in order to ensure 

rapid and effective repair.

Display messages and sound alerts.

A malfunction is usually indicated on the display.

Problems that cannot be solved by the user are 

reported through a fault code. Keep in mind, however, 

that these may appear in messages or alarms under 

particular conditions of use or during start-up. 

In such an event, deactivate the sound alert by 

pressing the Alarm 

 button, leave the appliance 

running and open the doors as infrequently as 

possible for 10-12 hours.

The refrigerator or the freezer is not working.

Is the appliance connected to the electrical power 

supply?

Is electrical power being supplied from the electrical 

socket?

Is the Unit   button activated?

Is the unit in "Demo" Mode?

The refrigerator or freezer is warmer than 

usual.

Does the display show a malfunction code?

Is the temperature adjusted correctly?

Were the doors or drawers open for a long period 

of time?

Were large quantities of food recently placed inside?

Is the unit in "Demo" Mode?

The appliance keeps running for a long time.

Bear in mind that during very hot weather and with 

very high temperatures in the room it is normal for 

the compressor to remain on for extended periods 

of time. 

Were the doors or drawers open for a long period 

of time?

Were large quantities of food recently placed inside?

Check that the doors are closed and that food or 

containers are not keeping the door from fully 

closing.

Are one or more of the compartments in Shopping 

Mode?

If you hear unusual noises

It is normal to hear noises from the ventilators or 

compressors during operation or during the defrost 

phase. 

The noise could be more noticeable depending on 

the position of the appliance and the surrounding 

environment.

Condensation inside and outside of the 

refrigerator.

If the atmospheric conditions are very humid or 

damp, the formation of condensation is normal. 

Opening the door or drawers for extended 

periods of time can contribute to the formation of 

condensation. In any case, make sure that the doors 

are always fully closed.

Ice or frost build-up inside the refrigerator or 

freezer.

Did you leave the doors open for a long period of 

time?

Are the doors closing completely?

If the doors will not fully close, contact your installer.

In the event of frost or ice build-up in the Fresco 

compartment due to frequent and extended 

opening of the doors, deactivate the Fresco function 

via the button on the control panel. Wait until the 

frost or ice melt, then remove the drawer and dry 

the sides and bottom of the compartment.

Unpleasant odours inside the refrigerator.

Clean the appliance thoroughly according to the  

instructions.

Hermetically cover all of the food. Do not store food 

for extended periods of time.

The doors are difficult to open.

The appliance is designed to ensure a fully hermetic 

closure. When the door is closed, a vacuum condition 

can be created: in such an event,it is necessary to 

wait a few seconds until the pressure balances 

before opening the door.

The appliance is cooling, but the lights and display 

are not working.

Check to see if the appliance was accidentally put 

into Sabbath Mode.

The Ice Maker does not work.

Make sure that the Ice Maker is on (       icon).

To switch the Ice Maker on, press the button.

Make sure that the appliance is connected to the  

water supply.

The Ice Maker does not produce sufficient 

amounts of ice.

On average, the Ice Maker produces approximately 

10 cubes of ice every two and a half hours.

Ice Maker

Water Filter

Water System Purge

11. TROUBLESHOOTING GUIDE