Hiberg RFC-400DX NFGB inverter - Инструкция по эксплуатации - Страница 43

Холодильник Hiberg RFC-400DX NFGB inverter - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.

Если остались вопросы, задайте их в комментариях после инструкции.

"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Страница:
/ 52
Загружаем инструкцию
background image

43

www.hiberg.ru

English

To replace the LED light bulb, the 

following steps should be taken:

1. Turn off the refrigerator. Remove the  

lid with the LED bulb by pressing up 

and away from yourself.

2. Hold the lid with the LED bulb with 

one hand and press the latch with the 

other.

3. 

Replace the LED bulb and fix it

Problem

Reasons/Solutions

The refrigerator is not 

working.

• There is no electricity.

• The plug is poorly inserted into the outlet.

• The socket is malfunctioning.

The temperature 

inside refrigerator 

compartments is too 

high.

• The doors of the compartments are not tightly closed, the seals on the 

doors are damaged.

• The thermostat is in the wrong position.

• Too many products are placed inside compartments.

The products in the 

refrigerator compartment 

are overcooled.

• The thermostat is in the wrong position.

• The products are in contact with the back wall of refrigerator.

The compressor is 

constantly running.

• Refrigerator doors do not close tightly and open too often.

• The room temperature is too high.

• The thermostat is in the wrong position.

The refrigerator is too 

noisy when working.

• The refrigerator is not aligned.

• The refrigerator touches foreign objects (for example, surrounding 

furniture).

• The refrigerant circulating inside the cooling system may make a low 

noise, even if the compressor is not working. Don’t worry, it is normal.

Condensation appeared 

on the surface of the 

refrigerator.

• Condensation may occur due to changes in room temperature. 

Remove the condensate. If the problem appears all the time, contact 

the service center.

The surface of the 

refrigerator is heating 

up.

• The compressor is not working. Turn the thermostat to the maximum 

cooling position and wait a few minutes. If you do not hear any noise, 

it means that the compressor is not working. It is necessary to contact 

the service center. 

ATTENTION! 

Do not try to repair the refrigerator yourself. If you were unable to fix the 

problem by following the steps below, contact a qualified electrician, service 

manager or the store where the refrigerator was purchased.

TROUBLESHOOTING

ATTENTION!

Replacing the lamp by an unqualified 

person may result in injury or 
significant damage to the product.

Defrosting

This refrigerator is equipped with a  

No Frost automatic defrosting system. 

Thus, during defrosting, the formed 

plaque from ice and frost flows into 

a special tray, from which, in turn, it 

evaporates afterward.

Содержание

Характеристики

Оцените статью
tehnopanorama.ru
Остались вопросы?

Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)

Задать вопрос

Часто задаваемые вопросы
Как посмотреть инструкцию к Hiberg RFC-400DX NFGB inverter?
Необходимо подождать полной загрузки инструкции в сером окне на данной странице
Руководство на русском языке?
Все наши руководства представлены на русском языке или схематично, поэтому вы без труда сможете разобраться с вашей моделью
Как скопировать текст из PDF?
Чтобы скопировать текст со страницы инструкции воспользуйтесь вкладкой "HTML"