Hiberg RFC-400DX NFGB inverter - Инструкция по эксплуатации - Страница 32

32

REFRIGERATOR LEVEL  

ADJUSTMENT

Level adjustment is necessary 

to eliminate vibration. If refrigerator 

level is not adjusted properly during 

installation, the door may not close 

tightly. Subsequently, this can lead to 

problems with cooling, freezing and 

maintaining the humidity level.

We recommend leveling the 

refrigerator as follows:

1. Roll the refrigerator to the 

installation site.

2. Unscrew the adjustable legs until 

they come into contact with the floor.

3. Tilt the refrigerator back by 10 mm 

or 0.5 degrees, making 1-2 additional 

turns of the adjustable legs. This will 

allow the refrigerator door to return to 

the closed position.

4. If necessary, move the refrigerator.

Depending on the model, you may 

need a screwdriver.

Do not forget to twist the legs back 

for unhindered movement, and then 

repeat the above installation steps.

ATTENTION! 

The wheels are not designed to 

move the refrigerator left or right and 

should only be used to move back 

and forth.

Depending on the refrigerator model, 

various plastic and glass shelves for 

storing food are included in the delivery 

set. One of the glass shelves should be 

installed above the vegetable container. 

The remaining shelves are installed at 

your choice.

ATTENTION! 

Do not turn the refrigerator over 

and do not put it on its side. 

The maximum tilt is 45 degrees. 

When lifting the refrigerator, 

never hold the door handle, top 

panel or tubes, as there is a high 

probability of deformation and 

breaking off of these parts.

AFTER INSTALLATION

After installing the refrigerator, it is 

necessary to wipe it thoroughly before 

usage. Recommendations for the care 

of the refrigerator are listed in the 

chapter 

«Cleaning and maintenance».

Shorten

Lengthen