Hiberg RFC-400DX NFGB inverter - Инструкция по эксплуатации - Страница 31

31

www.hiberg.ru

English

Installation and connection 

scheme

In order to increase the efficiency of 

the cooling system and conserve energy, 

it is necessary to ensure proper ventila-

tion around refrigerator to deflect the 

heat. For this reason, there should be 

enough of free space around the refrig-

erator. Recommended distance: at least 

10 cm from the back wall, at least 10 cm 

to the ceiling, at least 10 cm to the sides. 

There should be enough space in front of 

the refrigerator to open the door at least 

145-150° angle.

Note: this refrigerator performs 

its functions subject to compliance 

with the requirements of the cli-

mate class. The compliance of the 

climate class with temperature con-

ditions is shown in the table below. 

The climate class of your refrigera-

tor is indicated in the technical 

specifications of this Manual and in 

the rating label on the refrigerator 

body.

INSTALLATION AND PREPARATION FOR WORK

W

D

595 mm

635 mm

H

A

2000 mm

966 mm

B

C

1202 mm

125°

E

F

75 mm

100 mm

Climate class

Surrounding temperature 

SN

from +10°C to +32°C

N

from +16°C to +32°C

ST

from +16°C to +38°C

T

from +16°C to +43°C

Install the refrigerator in a dry place 

away from sources of high humidity.

Place the refrigerator out of direct 

sunlight, rain or snow, as well as heat 

sources such as stoves/stoves, radia-

tors, fireplaces or heaters.

If refrigerator is installed in a corner, 

there should be a sufficient distance be

-

tween the side wall of the refrigerator at 

the side of the door hinges and the wall 

to open freely refrigerator’s door.

Installing the refrigerator on the car-

pet can cause it to overheat. To avoid 

this, it is necessary to put a rubber mat 

or a wooden stand on the carpet, provid-

ing a gap of 2.5 cm.

Refrigerator is not intended for use 

in garages or outdoor areas. Do not 

cover the refrigerator.