Hiberg RFC-400DX NFGB inverter - Инструкция по эксплуатации - Страница 33

33

www.hiberg.ru

English

ATTENTION! 

The refrigerator must be 

disconnected from power supply 

during the re-hanging of the door.

Please note that when removing 

the doors, excessive force is not 

required, as well as exposure to the 

walls of refrigerator with sharp and 

cutting objects.
For the subsequent correct 

installation of the door make 

sure that it opens freely and its 

movement is not hindered by 

foreign objects, such as furniture or 

household appliances located in the 

immediate vicinity.

If necessary, you can change the sides 

of the door opening from the right one 

(according to the delivery set) to the left 

one.
The scheme of doors re-hanging:
1.  Unscrew and remove the plastic cover 

from the upper door hinge.

2.  Unscrew the bolts of the upper hinge 

and remove it.

Re-hanging of doors

3.  Unscrew the bolts of the mounting 

plate of the top cover.

4.  Remove the refrigerator door and put 

it aside.

5. 

Remove the central hinge by first 

unscrewing the screws.

6.  Remove the freezer door and put it 

aside.

7.  Pull the plug out of the hinge hole 

located on one side of the freezer 

door and insert this plug into the 

hole on the other side of the door.

8.  Remove the refrigerator legs.
9.  After unscrewing the bolts, remove 

the lower hinge. Flip the lower hinge 

and place it on the other side of the 

refrigerator.

10. Swap the adjustable legs and install 

them. Set the refrigerator by level.

11. Move the central hinge to the other 

side after the lower door has been 

installed.

12. Install the upper hinge, the upper 

hinge cover and the upper mounting 

plate after installing the upper door.