Генераторы Ryobi RiG2000PC 5133002557 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
27
English (Original instructions)
ELECTRICAL
GENERATOR CAPACITY
Make sure the generator can supply enough continuous
(running) and surge (starting) watts for the items you will
power at the same time. Follow these simple steps.
1. Select the items you will power at the same time.
2. Total the continuous (running) watts of these items.
This is the amount of power the generator must
produce to keep the items running. See the wattage
reference chart at right.
3. Estimate how many surge (starting) watts you will
need. Surge wattage is the short burst of power needed
to start electric motor-driven tools or appliances such
as a circular saw or refrigerator. Because not all
motors start at the same time, total surge watts can be
estimated by adding only the item(s) with the highest
additional surge watts to the total rated watts from step
2.
Example:
Tool or
Appliance
Running Watts*
Additional Starting
Watts*
Refrigerator
700
1350
Portable fan
40
120
Laptop
250
250
46" flat panel
television
190
190
Light (75 Watts)
75
75
1255 total
Running watts
1350 highest
starting watts
Total Continuous (Running) Watts
1255
Plus Highest Additional Surge Watts
+1350
Equals Total Generator Output Required
2605
POWER MANAGEMENT
To prolong the life of the generator and attached devices,
it is important to take care when adding electrical loads
to the generator. There should be nothing connected
to the generator outlets before starting its engine. The
correct and safe way to manage generator power is to
sequentially add loads as follows:
1. With nothing connected to the generator, start the
engine as described later in this manual.
2. Plug in and turn on the first load, preferably the largest
load (highest wattage) you have.
3. Permit the generator output to stabilise (engine runs
smoothly and attached device operates properly).
4. Plug in and turn on the next load.
5. Again, permit the generator to stabilise.
6. Repeat steps 4 and 5 for each additional load.
7. Never add more loads than the generator capacity.
Take special care to consider surge loads in generator
capacity as previously described.
CAUTION
Do not overload the generator’s capacity. Exceeding the
generator’s wattage/amperage capacity can damage
the generator and/or electrical devices connected to it.
Application/Equipment
Estimated
Starting
Watts*
Estimated*
Additional
Starting
Watts
Emergency / Home Standby
Lights (qty. 4 x 75 W)
300
300
Refrigerator
700
1350
46" flat panel television
190
190
Satellite receiver
250
250
Portable fan
40
120
Heater
1300
1300
Laptop
250
250
Slow cooker
270
270
Radio
50
50
DIY/Job Site
Electric drill
−
10 mm (3/8")
600
1000
Quartz halogen work light
1000
1000
Reciprocating saw
960
1920
Circular saw
−
184 mm (7-1/4")
1400
2300
Mitre saw
−
254 mm (10")
1800
1800
Air compressor
−
1/4 HP
970
1600
Airless sprayer
−
1/3 HP
600
1200
*Wattages listed are approximate. Check tool or appliance for actual wattage.
FEATURES
KNOW YOUR GENERATOR
See Figure 1.
The safe use of the product requires an understanding
of the information on the product and in this operator’s
manual as well as a knowledge of the project you are
attempting. Before use, familiarise yourself with all
operating features and safety rules.
