AKSA AAP2200i - Инструкция по эксплуатации - Страница 42

9

AC Pilot Indicator Light

The green AC Pilot Indicator Light comes on when the 

engine starts and generates power.

CONTROL PANEL FUNCTIONS

Oil Warning 

Indicator

Overload 

Indicator

AC Pilot 

Indicator

DC Circuit Breaker

When the DC Circuit Breaker is in the “ON” position, the generator is able to supply power to connected electronic devices. 

When the DC Circuit Breaker is in the “OFF” position, the generator will no longer supply power. The DC Circuit Breaker 

automatically turns “OFF” when connecting electronic devices to the generator that exceed the generator’s rated output. If 

the DC Circuit Breaker turns off, reduce the load of connected electronic devices until the load is within the specified rated 

output. To re-establish power, return the DC Circuit Breaker back to the “ON” position.

CAUTION!

If  the  DC   Circuit Breaker turns  off  again,  stop  using  the  generator  immediately  and  consult 

our

dealers. 

Engine ECO Control

•

When the Engine ECO switch is turned to the “ON” position, the economy control unit automatically determines the

generator’s proper engine speed based on the connected electronic load. This results in superior fuel economy and

reduces noise.

•

When the ECO switch is turned to the “OFF” position, the engine runs at the rated speed of 4,850 r/min.

Note: 

The ECO switch must be turned to the “OFF” position when using electronic devices that require a large starting 

current, such as a compressor

.