AKSA AAP2200i - Инструкция по эксплуатации - Страница 41

Генераторы AKSA AAP2200i - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.

Если остались вопросы, задайте их в комментариях после инструкции.

"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Страница:
/ 64
Загружаем инструкцию
background image

8

CONTROL PANEL FUNCTIONS

ON/OFF Start Switch and Choke

Start Switch “OFF”

When the Start Switch is in the “OFF” position the fuel valve is 

switched off and the engine will not run.

Start Switch “CHOKE”

When the Start Switch is in the “CHOKE” position the fuel valve is 

switched on and the engine can be started.

Start Switch “ON”

When the Start Switch is in the “ON” position the fuel valve is switched 

on and the engine can run.

Note:

 

The Choke is not required to start a warm engine

Oil Warning Indicator Light

When the oil falls below the minimum level, the oil warning indicator 

light comes on and the engine stops automatically.  The engine will not 

Note:

 

If the oil warning indicator light does not come on and the en-

gine stalls, turn the Start Switch to “ON” and pull the recoil starter.

Engine Overload Indicator Light

If the engine overload indicator light comes on, the generator s wattage 

/ amperage capacity has been exceeded by connected electrical 

devices or by a power surge.   When this occurs, the green AC Pilot 

Indicator Light will go off.  The engine will continue to run, but the red 

Engine Overload Indicator Light will stay on and power will no longer 

be supplied to connected electronic devices.

How to Correct

1. Disconnect any electronic devices then stop the engine.

2. Reduce the total wattage of  connected electronic devices until it is

within the generator’s rated output.

3. Inspect the Air Inlet and Control Panel for any blockage.  Remove

blockage if found.

4. Restart Engine.

Note:

 

The engine overload indicator light may turn on for a few sec-

onds when attaching a load due to a power surge.  This is normal.

Oil Warning 

Indicator

Overload 

Indicator

AC Pilot 

Indicator

Oil Warning 

Indicator

Overload 

Indicator

AC Pilot 

Indicator

C H O K E

O N

O F F

 ,

,

Характеристики

Оцените статью
tehnopanorama.ru
Остались вопросы?

Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)

Задать вопрос

Часто задаваемые вопросы
Как посмотреть инструкцию к AKSA AAP2200i?
Необходимо подождать полной загрузки инструкции в сером окне на данной странице
Руководство на русском языке?
Все наши руководства представлены на русском языке или схематично, поэтому вы без труда сможете разобраться с вашей моделью
Как скопировать текст из PDF?
Чтобы скопировать текст со страницы инструкции воспользуйтесь вкладкой "HTML"