Makita PLM5120N2 - Инструкция по эксплуатации - Страница 8

8

- If petrol is spilled, do not attempt to start the engine 

but move the machine away from the area of 
spillage and avoid creating any source of ignition 
until petrol vapors have dissipated.

- Replace all fuel tank and container caps securely.

• Replace faulty silencers.
• Before using, always visually inspect to see that the 

blades, blade bolts and cutter assembly are not worn or 
damaged. Replace worn or damaged blades and bolts 
in sets to preserve balance.

Operation

• Do not operate the engine in a confined space where 

dangerous carbon monoxide fumes can collect.

• Mow only in daylight or in good artificial light.
• Avoid operating the equipment in wet grass, where 

feasible.

• Always be sure of your footing on slopes.
• Walk, never run.
• For wheeled rotary machines, mow across the face of 

slopes, never up and down.

• Exercise extreme caution when changing direction on 

slopes.

• Do not mow excessively steep slopes.
• Use extreme caution when reversing or pulling the 

lawn mower towards you.

• Stop the blade(s) if the lawn mower has to be tilted for 

transportation when crossing surfaces other than 
grass, and when transporting the lawn mower to and 
from the area to be mowed.

• Never operate the lawn mower with defective guards, 

or without safety devices, for example deflectors and/or 
grass catchers, in place.

• Do not change the engine governor settings or 

overspeed the engine.

• Disengage all blades and drive clutches before starting 

the engine.

• Start the engine carefully according to instructions and 

with feet well away from the blade(s).

• Do not tilt the lawn mower when starting the engine.
• Do not start the engine when standing in front of the 

discharge chute.

• Do not put hands or feet near or under rotating parts. 

Keep clear of the discharge opening at all times.

• Never pick up or carry a lawn mower while the engine 

is running.

• Stop the engine and disconnect the spark plug wire, 

make sure that all moving parts have come to a 
complete stop and, where a key is fitted remove the 
key:

- Before clearing blockages or unclogging chute.
- Before checking, cleaning or working on the lawn 

mower.

- After striking a foreign object. Inspect the lawn 

mower for damage and make repairs before 
restarting and operating the lawn mower.

- If lawn mower starts to vibrate abnormally (check 

immediately).

• Stop the engine and disconnect the spark plug wire, 

make sure that all moving parts have come to a 
complete stop and, where a key is fitted remove the 
key:

- Whenever you leave the lawn mower.
- Before refueling.

• Reduce the throttle setting during engine shut down 

and, if the engine is provided with a shut-off valve, turn 
the fuel off at the conclusion of mowing.

Maintenance and storage

• Keep all nuts, bolts and screws tight to be sure the 

equipment is in safe working condition.

• Never store the equipment with petrol in the tank inside 

a building where fumes can reach an open flame or 
spark.

• Allow the engine to cool before storing in any 

enclosure.

• To reduce the fire hazard, keep the engine, silencer, 

battery compartment and petrol storage area free of 
grass, leaves, or excessive grease.

• Check the grass catcher frequently for wear or 

deterioration.

• Replace worn or damaged parts for safety.
• If the fuel tank has to be drained, this should be done 

outdoors.

WARNING:

 Do not touch rotating blade.

WARNING:

 Refuel in a well ventilated area with 

the engine stopped.

3. PARTS DESCRIPTION (Fig. 1A 

& 1B)

Including

A: Spark plug wrench
B: Discharge channel