Husqvarna LC 356VP - Инструкция по эксплуатации - Страница 8

• Use personal protective equipment. Refer to 

Personal protective equipment on page 8.

• Make sure that you know how to stop the engine

quickly in an emergency.

• Never start the engine in a closed space or near

flammable material. The exhaust fumes from the

engine are hot and can contain sparks which can

start a fire.

• Do not operate the product unless the blade and all

covers are attached correctly. An incorrectly

attached blade can come loose and cause personal

injury.

• Make sure that the blade does not hit objects such

as stones and roots. This can do damage to the

blade and bend the engine shaft. A bent axle causes

heavy vibration and a very high risk that the blade

becomes loose.

• If the blade hits an object or if vibrations occur, stop

the product immediately. Disconnect the ignition

cable from the spark plug. Examine the product for

damages. Repair damages or let an authorised

service agent do the repair.

• Never attach the engine brake handle permanently

to the handle when the engine is started.

• Put the product on a stable, flat surface and start it.

Make sure that the blade does not hit the ground or

other objects.

• Always stay behind the product when you operate it.
• Let all the wheels stay on the ground and keep 2

hands on the handle when you operate the product.

Keep your hands and feet away from the rotating

blades.

• Do not tilt the product when the engine is started.
• Be careful when you pull the product rearward.
• Never lift up the product when the engine is started.

If you must lift the product, first stop the engine and

disconnect the ignition cable from the spark plug.

• Do not walk rearward when you operate the product.
• Stop the engine when you move across areas

without grass, for example paths made of gravel,

stone and asphalt.

• Do not run with the product when the engine is

started. Always walk when you operate the product.

• Stop the engine before you change the cutting

height. Never make adjustments with the engine

started.

• Never let the product stay out of view with the engine

started. Stop the engine and make sure that the

cutting equipment does not rotate.

Safety instructions for operation

Personal protective equipment

WARNING: Read the warning instructions

that follow before you use the product.

• Personal protective equipment cannot fully prevent

injury but it decreases the degree of injury if an

accident does occur. Let your dealer help you select

the right equipment.

• Use hearing protection if the noise level is higher

than 85 dB.

• Use heavy-duty slip-resistant boots or shoes. Do not

use open shoes or go with bare feet.

• Use heavy, long pants.
• Use protective gloves when necessary, for example

when you attach, examine or clean the cutting

equipment.

Safety devices on the product

WARNING: Read the warning instructions

that follow before you use the product.

• Do not use a product with defective safety devices.
• Do a check of the safety devices regularly. If the

safety devices are defective, speak to your

Husqvarna service agent.

To do a check of the cutting cover
The cutting cover decreases vibrations in the product

and decreases the risk of injury from the blade.
• Examine the cutting cover to make sure that there

are no damages such as cracks.

To do a check of the engine brake handle
The engine brake handle stops the engine. When the

engine brake handle is released, the engine stops.
• Start the engine and then release the engine brake

handle. If the engine does not stop in 3 seconds, let

an approved Husqvarna service agent adjust the

engine brake. (Fig. 11)

To do a check of the rear cover
The rear deflector decreases the risk that objects eject

in the direction of the operator.
• Make sure that the rear cover is not damaged.
• Make sure that the springs that close the rear cover

are not damaged.

• Replace damaged springs and damaged parts.
• Make sure that the rear cover can move smoothly on

the hinges.

Muffler
The muffler keeps the noise levels to a minimum and

sends the exhaust fumes away from the operator.
Do not use the product if the muffler is missing or

defective. A defective muffler increases the noise level

and the risk of fire.

8

1227 - 003 - 17.09.2019