Sony A7R Mark IV Body (ILCE-7RM4) - Инструкция по эксплуатации - Страница 34

ILCE-7RM4
5-007-325-41(2)

GB

34

C:\01_Compose\5007325412\5007325412ILCE7RM4CEC\01GB-ILCE7RM4CEC\030BAS.indd
DTP data saved:  2019/06/24  11:57
PDF file created:  2019/06/24  12:01

Auto focus

Focus Area

Selects the focusing area. Use this function when it is difficult to focus 
properly in the auto focus mode.

MENU 



 (Camera Settings 1) 



 [Focus Area] 



 desired 

setting.

Wide: 

Focuses on a subject covering the whole range of the screen 

automatically. When you press the shutter button halfway down in the 
still image shooting mode, a green frame is displayed around the area 
that is in focus.

Zone: 

Select a zone on the monitor on which to focus, and the product 

will automatically select a focus area.

Center: 

Focuses automatically on a subject in the center of the image. 

Use together with the focus-lock function to create the composition 
you want.

Flexible Spot: 

Allows you to move the focusing frame to a desired 

point on the screen and focus on an extremely small subject in a 
narrow area.

Expand Flexible Spot: 

If the product cannot focus on a single selected 

point, it uses focus points around the flexible spot as a secondary 
priority area for focusing.

Tracking: 

When the shutter button is pressed and 

held halfway down, the product tracks the subject within the selected 
autofocus area. This setting is available only when the [Focus Mode] is 
set to [Continuous AF]. Point the cursor at [Tracking] on the [Focus Area] 
setting screen, and then adjust the desired area to start tracking using 
the left/right sides of the control wheel. You can also move the tracking 
start area to the desired point by designating the area as a zone, 
flexible spot or expand flexible spot.