Brother FAX 2600 ч.4 - Инструкция по эксплуатации - Страница 1

T R O U B L E S H O O T I N G   A N D   R O U T I N E   M A I N T E N A N C E      

11 - 4

ERROR MESSAGE

CAUSE

ACTION

NOT REGISTERED

You tried to access a One 
Touch or Speed Dial 
number that is not 
programmed.

Set up the One Touch or 
Speed Dial number.  
See page 7-1 to 7-2.

PLS OPEN COVER

A page, piece of paper or 
paper clip, etc. may be 
jammed inside the 
FAX/MFC.

Open the top cover. If you 
see any jammed paper or 
other item, gently pull it 
out, then close the scanner 
unit. If the error message 
remains, open and close 
the top cover again. If the 
FAX/MFC cannot reset 
itself and return to the date 
and time prompt, it will 
display MACHINE 
ERROR XX. Please call 
Brother Customer Service 
and tell them the Machine 
Error number, at:
USA: 1-800-284-4329
From within Canada: 
 1-800-853-6660
From within Montreal:
 1-514-685-6464

PRINT OVERRUN

(May occur when the 
MFC is used as a 
printer.)
(For MFC 4600 Only)

The available Ram has 
been exceeded.

Unplug the MFC and plug 
it back in. Data remaining 
in the memory of the MFC 
will be deleted.

• If you have installed 

the Windows

®

 printer 

driver, try again after 
setting the TrueType 
mode to “Print as 
Graphics” in the 
PRINT menu of your 
application software.

• If this does not clear 

the error, reduce the 
complexity of your 
document or reduce 
the print resolution.

PRINTER JAM

The paper is jammed in 
the FAX/MFC.

Do not pull the paper out 
until you see page 11-6 
to 11-7.