DEFORT DEC-1646N 98291858 - Инструкция по эксплуатации - Страница 9

9

Chain saw

SAFETY NOTES

General Power Tool Safety Warnings Read all safety 
warnings and all instructions.
Failure to follow the warnings and instructions may 
result in electric shock, 

fi

 re and/or serious injury.

Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mainsoper-
ated (corded) power tool or battery-operated (cordless) power 
tool.

TECHNICAL DATA  

 1 

PRODUCT FEATURES  

 2 

The numbering of the product features refers to the illustration
of the machine on the graphics page.

1 Rear handle (insulated gripping surface)
2 Lock-off button for On/Off switch
3 On/Off switch
4 Oil 

fi

 ller cap

5 Activation lever for kickback brake (hand guard)
6 Front handle (insulated gripping surface)
7 Deactivation mark “for kickback brake”
8 Nose sprocket
9 Chain guard
10 Saw chain
11 Chain bar
12 Gripping teeth

WORK AREA SAFETY

●

  Keep work area clean and well lit. Cluttered or dark areas 

invite accidents.

●

  Do not operate power tools in explosive atmospheres, such 

as in the presence of 

fl

 ammable liquids, gases or dust. Pow-

er tools create sparks which may ignite the dust or fumes.

●

  Keep children and bystanders away while operating a power 

tool. Distractions can cause you to lose control. 

ELECTRICAL SAFETY

●

  Power tool plugs must match the outlet. Never modify the 

plug in any way. Do not use any adapter plugs with earthed 
(grounded) power tools. Unmodi

fi

 ed plugs and matching 

outlets will reduce risk of electric shock.

●

  Avoid body contact with earthed or grounded surfaces, such 

as pipes, radiators, ranges and refrigerators. There is an 
increased risk of electric shock if your body is earthed or 
grounded.

●

  Do not expose power tools to rain or wet conditions. Water 

entering a power tool will increase the risk of electric shock.

●

  Do not abuse the cord. Never use the cord for carrying, pull-

ing or unplugging the power tool. Keep cord away from heat, 
oil, sharp edges and moving parts. Damaged or entangled 
cords increase the risk of electric shock.

●

  When operating a power tool outdoors, use an extension 

cord suitable for outdoor use. Use of a cord suitable for out-
door use reduces the risk of electric shock. 

●

  If operating a power tool in a damp location is unavoidable, 

use a residual current device (RCD) protected supply. Use 
of an RCD reduces the risk of electric shock.

PERSONAL SAFETY

●

  Stay alert, watch what you are doing and use common 

sense when operating a power tool. Do not use a power tool 
while you are tired or under the in

fl

 uence of drugs, alcohol or 

medication. A moment of inattention while operating power 
tools may result in serious personal injury.

●

  Use personal protective equipment. Always wear eye pro-

tection. Protective equipment such as dust mask, non-skid 
safety shoes, hard hat, or hearing protection used for ap-
propriate conditions will reduce personal injuries.

●

  Prevent unintentional starting. Ensure the switch is in the 

off-position before connecting to power source and/or bat-
tery pack, picking up or carrying the tool. Carrying power 
tools with your 

fi

 nger on the switch or energising power tools 

that have the switch on invites accidents.

●

  Remove any adjusting key or wrench before turning the 

power tool on. A wrench or a key left attached to a rotating 
part of the power tool may result in personal injury.

●

  Do not overreach. Keep proper footing and balance at all 

times. This enables better control of the power tool in unex-
pected situations.

●

  Dress properly. Do not wear loose clothing or jewellery. 

Keep your hair, clothing and gloves away from moving parts. 
Loose clothes, jewellery or long hair can be caught in mov-
ing parts.

●

  If devices are provided for the connection of dust extrac-

tion and collection facilities, ensure these are connected 
and properly used. Use of dust collection can reduce dust-
related hazards.

POWER TOOL USE AND CARE

●

  Do not force the power tool. Use the correct power tool for 

your application. The correct power tool will do the job better 
and safer at the rate for which it was designed.

●

  Do not use the power tool if the switch does not turn it on 

and off. Any power tool that cannot be controlled with the 
switch is dangerous and must be repaired.

●

  Disconnect the plug from the power source and/or the bat-

tery pack from the power tool before making any adjust-
ments, changing accessories, or storing power tools. Such 
preventive safety measures reduce the risk of starting the 
power tool accidentally.

●

  Store idle power tools out of the reach of children and do 

not allow persons unfamiliar with the power tool or these 
instructions to operate the power tool. Power tools are dan-
gerous in the hands of untrained users.

●

  Maintain power tools. Check for misalignment or binding of 

moving parts, breakage of parts and any other condition that 
may affect the power tool’s operation. If damaged, have the 
power tool repaired before use. Many accidents are caused 
by poorly maintained power tools.

●

  Keep cutting tools sharp and clean. Properly maintained 

cutting tools with sharp cutting edges are less likely to bind 
and are easier to control.

●

  Use the power tool, accessories and tool bits etc. in accord-

ance with these instructions, taking into account the working 
conditions and the work to be performed. Use of the power 
tool for operations different from those intended could result 
in a hazardous situation.

SERVICE

●

  Have your power tool serviced by a quali

fi

 ed repair person 

using only identical replacement parts. This will ensure that 
the safety of the power tool is maintained.