Kuppersberg RC 6911 ANT - Инструкция по эксплуатации - Страница 49

49

ENGLISH

TECHNICAL PASSPORT

Oven

4. Select the cooking end time by

touchinh + or – . Next, a double beep 

will sound and the current time will be 

displayed on the display.

5. Select a cooking function and tem-

perature. The oven will remain disoon-

nected with the |-->| and -->| symbols lit 

up. The oven is now programmed.

6. When it is time to start сoooking, 

the oven will turn on and will operate 

for the programmed cooking time.

7. While cooking, the cooking time

remaining will be displayed and the |-->| 

symbol will flash slowly.

8. When the cooking time is up, the

oven will turn off, a buzzer will sound, 

and: the |-->| symbol will flash quickly.

9. Touch any sensor to stop the

buzzer and turn off the |-->| symbol. The 

oven will switch on again.

10. Set the controls to the 

o position

to turn off the oven.

You can change the remaining cook-

ing time at any time by touching – or 

+  until  the    |-->|  symbol  starts  to  flash 

quickly. Now press 

OK to change the 

time.

S A F E TY  I N S T R U CT I O N S

AQUALITIC CLEAN® F U N CT I O N

This function makes it easy to 

remove grease and other food debris 

that may have stuck to the sides of the 

oven.

For easier cleaning, do not allow 

dirt to accumulate. Clean the oven 

frequently.

Programming AQUALITIC 

CLEAN® 

WARNING

Do not pour water into a hot oven as 

this can damage the enamel of the oven.

Always run the cycle on a cold oven. 

The result could be affected and the 

varnish damaged if it is run when the 

oven is too hot.

First remove the trays and all 

accessories from the oven interior, 

including the tray supports and 

telescopic guide rails.

1. With the oven cold, spread a cloth

out on the bottom of the oven

2. Gently pour 200 ml of water into

the bottom of the oven cavity.