Kuppersberg HGG 663 T - Инструкция по эксплуатации - Страница 11

11

English

TEchnical passporT

gas oven

must be connected to the terminal 

marked ‘N’ or coloured blue or black.

The wire coloured Brown must be 

connected to the terminal market ‘L’ or 

coloured brown or red.

NOTE: 

The electrical outlet is to be 

positioned in an easily accessible 

position adjacent to the appliance. In 

the event that it is necessary to replace 

the mains lead, the replacement must 

conform  to  the  specifi cation  listed  in 

the Tecnical Data ensuring the correct 
colour 

code connection and that all 

screws are lightened suffi ciently.

CONNECTING TO THE GAS 

SUPPLY

The gas supply system must 

conform to current local law.

The type of gas for which the oven 

has been adjusted is shown on the 
rating plate on the lower edge of the 
oven front (visible with the door open) 
and on the packing.

Before making the connection, 

adjust the oven to the type of gas in 
the home.

The connection between the gas 

connection and teh pipe must be made 

in one of the two following ways (see 

the drawing on bottom page):



using a connector without 

a  sealing  ring  (the  oven  connector  is 

conical: ISO R 7)



interposing the metal 

sealing ring provided. 

Attention

:  when  fi nished  check 

that there are no gas leaks. Use soap 

and water, or another liquid suitable 

for the purpose, to check for gas leaks. 

Do  not  use  a  fl ame  to  search  for  gas 

leaks.

Warning

:  the  use  of  fl exible 

rubber tubing attached to the outlet 

connector is prohibited because it 

cannot be inspected.

Adapting to the gas in use

It is possible to use other types of 

gas by adapting the burner adjusment 

as follows: Make sure that the oven is 

not connected to the electric power 

supply.

Open the oven door completely 

and remove the oven bottom. Remove 

the burner by unscrewing its screw, 

then unscrew the injector and replace 

it.

Reassemble the burner in the oven 

and the oven bottom.