Fulgor Milano CO 7514 TC X - Инструкция по эксплуатации - Страница 30

30

31

GB

The count begins now. When the time is up, the oven will make 
a beeping sound, the heating elements will be switched off and 
cooking will stop.
The special symbol will flash, as will the duration which was 
set on the clock display. Press any button to stop the beeping 
sound.
After eight seconds, the oven switches off automatically unless 
other cooking functions are programmed.

Programming the timer: cooking end time

Touch the timer symbol twice. The relative symbol lights up.

The dividing dots flash to indicate that it is possible to 
programme the cooking end time.

Set the cooking end time by touching the + and – symbols.

Once the cooking end time has been 
set, the display will show the current time 
again and the cooking end symbol will be 
lit.

The count begins now. When the set time is reached, the oven 
will give off a beep, the heating elements will be switched off 
and cooking will stop.
The special symbol will flash, as will the cooking end time 
which was set on the clock display: press any button to stop 
the beeping sound.
After eight seconds, the oven switches off automatically unless 
other cooking functions are programmed.

Programming the timer: delayed cooking

Using the combination of the two cooking time and cooking 
end time modes, it is possible to programme the oven to start 
cooking at a later time than the current time.
For example, it is 8.30 a.m. and you’re about to leave home, 
but you would like a roast to be ready for 1.00 p.m.. Here’s 

what to do:

Prepare the roast for cooking and place 
it in the oven.

Switch on the oven, select the cooking function and set the 
temperature.

Now set the cooking time, let’s say two hours.

Now set the cooking end time: the control usually 
adds the cooking time to the current time and 
proposes the result as the cooking end time. In our 
case it will propose 10:30 (8:30+2 hours).

Change the cooking end time to make it coincide with the time 
you require. In our example this is 1.00 p.m.
The oven now enters into stand-by and the oven light switches 
off. When it is time to start cooking, the light will not be 
automatically switched on because it is logical to assume that 
the delayed start coincides with your absence, so it is pointless 
to leave the light on for no reason.

The control will automatically 
activate the oven at 11:00 (1:00 
p.m. –2 hours) and will switch it 
off  at 1.00 p.m., meaning that the 
roast will be ready when you arrive 
home!

Programming the timer: minute counter

The minute counter is a function of the timer which is 
independent of the operation of the oven, meaning that it does