Духовые шкафы De Dietrich DME 795 W - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
EN
2/INSTALLING YOUR APPLIANCE
42
• BEFORE CONNECTING
Warning:
Check that your appliance has not
been damaged during transport (damage
to door or seal, etc.). If you notice any
damage, contact your retailer before using
the appliance.
In order to easily locate the reference
information for your appliance, we
recommend that you note these data on the
«After-Sales Service» page.
• ELECTRICAL CONNECTION
Check that:
- the electrical installation has sufficient vol-
tage.
- the supply cables are in good condition
- the diameter of the wires complies with the
installation requirements.
- your equipment has a protection of at least
16 amps.
If in doubt, contact your electrician.
The electrical connections should be made
before the appliance is installed in its housing.
Electrical safety must be ensured through
proper installation in the housing. During
installation and maintenance operations, the
appliance must be unplugged from the electrical
grid; fuses must be cut off or removed.
The appliance must be connected using a
(standardised) feeder cable with 3 conductors
of 1.5 mm
2
(1 live + 1N + ground) which must
be connected to the 220-240 V ~ monophase
network using a CEI 60083-standardised 1 live
+ 1N + ground electrical outlet or one which
complies with installation requirements. The
protection cable (green-yellow) is connected to
the appliance’s
terminal and must be
connected to the appliance’s ground.
If the connection is made with a plug, it must
remain accessible after the appliance has been
installed.
The oven’s neutral (blue cable) must be
connected to the network’s neutral.
Ensure your electrical installation has a system
accessible to the user which can cut off the
appliance from the power grid, with a contact
opening of at least 3mm for all the terminals.
If the supply cable is damaged, it must be
replaced by the manufacturer, its after-sales
service or any other similarly qualified person
to avoid any danger.
Warning:
We cannot be held responsible for
any accident resulting from an inexistent,
defective or incorrect ground lead.
If the oven presents any irregularity, unplug
the appliance or remove the relevant fuse at
the oven’s connection lead-in.
Характеристики
Остались вопросы?Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)
