Asko OP8693S - Инструкция по эксплуатации - Страница 29

29

Roasting with a meat probe (depending on the model)

In this mode, set the desired temperature of the food core. The oven operates until the food core reaches the set 

temperature. Temperature core is measured by the temperature probe.

1

Remove the metal cap 

(

the socket is in the front 

upper corner of the oven right wall

)

.

2

Connect the meat probe plug to the socket and stick 

the probe into the food. 

(

If any timer settings were 

activated, they will be cancelled.

)

3

Choose the system 

(

lower heater and fan

)

.

Preset temperature and probe temperature will be displayed. Touch the START key.

 During cooking, the rising temperature of the core will be displayed 

(

the desired core temperature may be adjusted 

during the cooking process

)

.

When the set core temperature is reached, the cooking process will stop.

An acoustic signal will be heard which you may turn o

ff

  by touching any key. After one minute, the acoustic signal will be 

switched o

ff

  automatically. Clock will appear on the display.

After the cooking process, replace the metal cap of the meat probe socket.

Only use the probe intended for use with your oven.Make 

sure the probe does not touch the heater during cooking.

After the cooking process, the probe will be ver y hot. Take 

care to prevent burning.