Neff D99L11N0 - Инструкция по эксплуатации - Страница 12

12

Cleaning and care

L

OOKING AFTER THE APPLIANCE

Suitable cleaning agents and care products
for your appliance can be purchased via the
Hotline or from the Online Shop (see cover
page).

Appliance surfaces

NOTE: 

Observe the warranty regulations in

the enclosed service booklet.

The appliance surfaces and controls are

scratch-sensitive. Therefore observe the
following cleaning instructions:
– Avoid cleaning the extractor hood with dry

cloths, abrasive sponges, scouring agents, 
cleaning agents containing sand, soda, 
acid, chlorine or any other aggressive 
substances.

– Clean the appliance surfaces and controls 

with a soft, damp cloth, washing-up liquid
or a mild window cleaner only.

– Do not scrape off dried dirt, but moisten 

with a damp cloth.

– Clean carefully in the area of the controls 

to avoid liquid from getting into the 
electronics.

NOTE:

Clean the stainless steel surfaces in

the direction of the ground surface only!
Do not use stainless steel cleaner for the
control buttons!

Looking after the appliance

Suitable cleaning agents and care

products for your appliance can be
purchased via the Hotline or from the 
Online Shop (see cover page).

Metal-mesh grease filters

The inserted metal-mesh grease filters

absorb the grease particles from the kitchen
fumes.

The filter mats consist of fire-proof metal.

RISK OF FIRE

As the filters become more saturated with
greasy residue, the flammability increases.
The function of the extractor hood may also
be impaired.

The risk of fire is prevented by cleaning

the metal-mesh grease filters in good time.

When cleaning the grease filters, also

remove grease deposits from the accessible
parts of the housing with a damp cloth.

Cleaning the metal-mesh
grease filters ...

Under normal operation (daily 1 to 2

hours), the metal-mesh grease filters must
be cleaned 1x month.

... in the dishwasher

The metal-mesh grease filters can be

cleaned in the dishwasher. Slight
discolouration may occur but this will not
affect the function of the grease filters.

The filters must be placed loosely in the

dishwasher. They must not be wedged in.

NOTE:

Do not clean heavily saturated metal-

mesh grease filters together with utensils.

... by hand

When cleaning by hand, soak the grease

filters in a hot detergent solution, brush off
the dirt, rinse thoroughly and leave to dry.

Do not use any aggressive, acidic or

alkaline cleaning agents.

If dirt is particularly stubborn, we

recommend using a special grease solvent
spray. This can be ordered via the Online
Shop.

Removing and installing the grease filters

Before removing and installing the grease

filters, always follow the instructions and
warnings in the chapter entitled “Safety
instructions”!

Removing and installing the metal-mesh
grease filters

1.

Open the lock and fold down the grease
filters. In doing so, hold the underside of
the grease filters with your other hand.

2.

Clean the grease filters.

3.

Reinsert the cleaned grease filters.

Changing the activated carbon filter

Under normal operation (daily 1 to 2

hours) the activated carbon filters must be
replaced approximately 2x year.

The activated carbon filter is available

from specialist outlets, customer service or
the Online Shop (see Optional accessories).
Use original filters only.

Activated carbon filters do not contain

any pollutants. They can be disposed of in
the household refuse.

1.

Remove metal-mesh grease filter.

2.

Unlock flue duct on both sides and
slide downwards.

3.

Remove both activated-carbon filters
forwards and replace.

4.

Push flue duct upwards until it clicks
into position.