Elica FOLD GR/A/72 - Инструкция по эксплуатации - Страница 10

after somewhat prolonged use depending on the type of cooking and how regularly the grease filter is cleaned.

• 

 Washable activated carbon filter (for filter version only):

The  carbon  filter  can  be  washed  every  two  months  (or  when  indicated  by  the  filter  saturation  system  -  if  included  in  your
model).  As  indicated  in  the  drawing  section:  remove  the  grease  filter,  remove  the  carbon  filter  and  wash  using  hot  water
and  suitable  detergents  or  in  a  dishwasher  at  65°C  (if  washing  in  a  dishwasher,  carry  out  the  complete  washing  cycle
without  dishes  inside).  Remove  any  excess  water  without  damaging  the  filter,  then  place  it  in  the  oven  for  10  minutes  at
100°C to dry it out completely. Put the anti-grease filters back in place.
Replace the foam layer every 3 years and each time the cloth appears damaged.

Illumination

• Lighting system : The lighting system cannot be replaced by the user, contact Customer Service in case of malfunc-

tion.

•  The  lighting  system  is  based  on  LED  technology.  LEDs  provide  optimal  illumination,  last  up  to  10  times  longer  than
conventional lamps and save 90% of electricity.

OPERATION

T1

T2

L1

L3

L5

L2

L4

T3

T5

T4

T1 Motor ON/OFF
Press the button to start the hood at speed 1.
Press the button during operation to switch the hood OFF.
T2 Increase speed
Press the button to switch the hood from OFF to speed 1.
Press the button (with hood ON) to increase the motor speed from speed 1 to intensive.
With each speed, the respective LED lights up.
Speed 1 LED L1
Speed 2 LED L2
Speed 3 LED L3
Intensive speed LED L4 (flashing)
Intensive speed is timed. Standard timing is 5’, after which the hood switches to speed 2.
To  deactivate  the  function  before  the  time  expires,  press  T2;  the  hood  will  switch  to  speed  1;  press  T1  to  switch  off  the
hood.
T3 Lights ON/OFF
T4 Speed timer
T5 Operating status indicator.

Speed timer
The speed timer is enabled by pressing T4; after the set time, the hood switches off.
Timing is subdivided as follows:
Speed 1 - 20 minutes (LED L1 flashing)
Speed 2 - 15 minutes (LED L2 flashing)
Speed 3 - 10 minutes (LED L3 flashing)
Intensive speed - 5 minutes (LED L4 flashing).
During timed operation, press T1 to switch off the hood; press T2 or T4 to make the hood
go back to the set speed.

Grease filter warning
After 40 hours of operation, LED L5 lights up.
When this warning appears, it means that the installed grease filter needs to be washed.
To reset the warning, press and hold key T1 for 3”.

9