Gorenje GBFU150EDDB6 - Инструкция по эксплуатации - Страница 19

19

CAUTION: Prior to each reach in the inner of the water heater it must absolutely be 

disconnected from the electric network!

OPERATION AND MAINTENANCE 

After connecting to water and power supply, the heater is prepared for use. 

The water heater features an that enables of water temperature of in water heater tank. The 

electronic regulator allows manual adjustment of temperature in range from 35ºC to 75ºC

,

settings  to cost saving operation mode and temperature adjustment to prevent freezing. 

Electronic regulator display shows the current temperature of water in water heater.

OPERATION CONTROL:

The heater is switched ON and OFF by pressing the  

  key for 2s. 

Continue pressing the  

  key and select  the three operating modes:

- 

 protection against freezing (factory water temperature set  to 7ºC)

- 

 cost saving operation (factory set to 55ºC)

- 

 optional manual setting of temperature in the range from 35ºC to 75ºC (increments of 

1ºC)

Protection against freezing:

-  Use the  

  key and select the    operating mode (yellow control lamp under   is on) 

-  The regulator is set to temperature 7ºC – shown on the display

Cost saving operating mode:

-  Use the  

  key and select the   operating mode (yellow control lamp under     is on) 

-  The regulator is set to  temperature 55ºC  – shown on the display

EN