Miele KWT 2672 - Инструкция по эксплуатации - Страница 31

Installation

*INSTALLATION*

31

The electrical socket should be close
to the wine conditioning unit and
easily accessible.



Risk of damage due to electrical

overload.
If the wine conditioning unit is elec-
trically overloaded, this can cause a
short circuit and therefore damage to
your appliance.
When you install appliances side by
side, each appliance must have its
own separate electrical socket.

Tip: 

Secure the power cable to prevent

it becoming caught: tie a piece of string
to the middle of the power cable and as
the wine conditioning unit is being
pushed into the niche, pull the cable
forward underneath the appliance.



Push the wine conditioning unit into
the building-in niche.



If the wine conditioning unit cannot
be pushed into the building-in niche
(because the floor is uneven, for ex-
ample), unscrew the rear feet slightly
(see “Aligning the wine conditioning
unit” in “Installation”) and slide the
appliance into the niche.



Remove the edge protection 



 from

the adjacent furniture fronts.

Aligning the wine conditioning unit

The installation aids 



 on the appli-

ance door provide assistance with the
alignment of the wine conditioning unit
in the building-in niche.

The installation aids are suitable for a
furniture front thickness of 19 mm or
38 mm.



Align the wine conditioning unit with
adjacent furniture fronts as described
below.

Furniture front thickness of 19 mm