Zanussi ZGL 63 IX - Инструкция по эксплуатации - Страница 7

 7

Operation

Hob burner control knobs

The symbols on the knobs mean:

"

= no gas supply

= maximum gas supply

= minimum gas supply

For easier lighting,  proceed before
putting a pan on the pan support

.

Lighting the burners

To light a burner, , press the relevant

switch marked with a small spark ( ).

Then, push in the relevant knob and
turn it anticlockwise to "maximum posi-
tion".

C h e c k   t h e   f l a m e   i s   r e g u l a r   a n d

adjust it as required.

If you cannot light the flame even

after several attempts, check the "cap"
and “crown”   (see picture - lett. A, B)
are in the correct position.

In the absence of electricity, igni-
t i o n   c a n   o c c u r   w i t h o u t   t h e
electrical device; in this case
a p p r o a c h   t h e   b u r n e r   w i t h   a
flame, push the relevant knob
down and turn it anti-clockwise
until it reaches the "maximum"
position.

To switch off burners

To put the flame out, turn the knob to

the symbol (

"

).

Take care when frying food in
hot oil or fat, as the overheated
splashes could easily ignite.

When switching on the mains, after
installation or a power cut, it is qui-
te normal for the spark generator to
be activated automatically.

!

!

A

- Burner cap

B

- Burner crown

C

- Ignition candle