Vestel VH64E352B - Инструкция по эксплуатации - Страница 33

EN - 13

Triple Zone. The Triple Zone Indicator will 

illuminate to confirm this.

Pressing   again will switch off the Triple 

Zone of the heater. Each operation causes 

a status change of the Dual and Triple 

Zones in the following manner: dual zone 

on/off, triple zone on, all extended zones 

off, dual zone on/off, triple zone on, all 

zones off, and so on.

Set Cooking Level with and without Heat 

Boost 

All heaters are equipped with the heat 

boost function.

If the heat boost is required, set the heat to 

0 using the slider then to level 9. Once level 

9 has been reached, the display will flash 

“

A

” alternating with the heat setting value 

“

9

” to show the heat boost is active.

If the heat boost is active, the heater will 

operate with maximum power for a period of 

time dependent on the heat setting selected 

before the heat boost was activated.

Once the heat boost time has ended, only 

the heat setting will be indicated on the 

heater display.

The heat boost can be deactivated by 

pressing the Sliding Button until the heat 

setting “

0

” is displayed.

Switching Off Individual Heaters

A selected heater can be turned off in 3 

different ways:

•  Simultaneous pressing of the right 

and left sides of the slider button 

•  Reduction of the heat setting 

to “

0

” using the slider button 

•  Use of the timer switch-off function for 

the corresponding heater.

Timer Function

The control can run a maximum of 4 heater-

assigned timers and 1 minute minder 

timer (which is not assigned to a heater) 

simultaneously. The timers can only be 

used in B-Mode. A heater timer can only 

be assigned to an active heater which has 

been set to a level between 1 and 9. The 

minute minder timer is independent of any 

heater.

In order to use both functions, the timer 

function must be activated using the 

Activate/Deactivate Timer button  .

Pressing   for the fist time after activating 

the heaters will control the minute minder 

timer (no Cooking Zone Indicator will be 

flashing, they are all on or off).

Pressing   for a second time will assign a 

timer to one of the activated heaters. The 

Cooking Zone Indicator will flash.

Pressing   again, will assign the next 

timer in a clockwise direction to the next 

active heater, and so on.

Minute Minder Timer

The minute minder timer can be operated 

by pressing  , whether a heater has been 

activated or not, and is selected only when 

all Cooking Zone Indicators are either on or 

off, i.e. none will be flashing.

The Timer Display will show “

00

” to 

indicate the timer is active. The decimal 

point on the Timer Display indicates that 

 can now be used to set 

the timer value.

The minute minder timer will begin counting 

down once it has been set, it will not stop 

if the appliance is switched off or if the Key 

Lock function is activated.

Once it has reached zero, “

00

” will be 

displayed on the Timer Display and the 

buzzer will sound. Press any button to stop 

the buzzer sounding.

Heater Timer

Heater Timers can only be set when a 

heater has been activated, i.e. a heater 

level must be set between 1 and 9.

Pressing   once will activate the minute 

minder timer, pressing   again will assign 

the timer to an activated heater. This will 

be indicated by the corresponding Cooking 

Zone Indicator flashing.

Pressing   for a third time, after setting 

the first heater timer, will activate the timer 

for the next active heater in a clockwise 

direction. This will be indicated by its 

corresponding Cooking Zone Indicator 

flashing. Pressing 

 will 

allow the timer to be set a value for the 

active heater.

The timer for the heater that was set first 

will be indicated by the illumination of its 

corresponding Cooking Zone Indicator. 

Pressing   again will allow more timers to 

be assigned to the other activated heaters. 

The Timer Display will change, 10 seconds 

after the last operation, to the timer that will 

run out next. The number of timers that are 

running will be indicated by the number of 

illuminated Cooking Zone Indicators.

The timer values for the heater timer and 

minute minder timer can be displayed by