Варочная панель Pando PGA-4370 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.

ATTENTION:
Before each cleaning, disconnect the appliance
from the gas and electrical mains.
2) COOKTOP
If you would like to keep the surface of your cooktop
shiny, wash it using warm water with soap after each
use, rinse and dry. You should also wash enameled
grates, enameled caps A, B and C and burner heads
(see Fig. 6-6/A), clean igniters AC and thermocouple
sensors TC (see Fig. 6). Washing all of these parts in
a dishwasher is prohibited.
Make sure to be careful when cleaning. Use a small
nylon brush as shown in the figure (see Fig. 6/C) and
leave the appliance until completely dry. Cleaning
should be done after the cooktop and its components
cools down completely. It is prohibited to use scouring
pads, abrasive powders and corrosive sprays.
Long-time contact of the surface with such products as
vinegar, coffee, milk, salty water and lemon or tomato
juice, must be avoided.
WARNINGS:
When installing components in their places,
please follow these guidelines:
- Make sure that the slots of T burner heads (Fig.
6) are not blocked by foreign objects.
- Make sure that enameled caps A, B and C (Fig. 6
and 6/A) are correctly installed on burner heads.
In the correct position, a cap installed on the
head is completely stable.
- Grates must be installed using appropriate
centering pins (or on aluminum profile, if
available). Check for complete stability.
- If a valve opens or closes with effort, do not apply
force: contact the technical assistance service
immediately.
- Using steam jet for appliance cleaning is
prohibited.
- To prevent ignition problems, carefully clean the
igniters
(ceramics
and
electrode)
and
thermocouples at regular intervals.
Note: in case of regular use, the area of
burners installation can discolor due to
exposure to high temperature.
FIG. 6
FIG. 6/A
FIG. 6/B
FIG. 6/C
CLEANING
INOXPAN S.L.
82
EN
Характеристики
Остались вопросы?Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)