Franke FMA 804 I F BK - Инструкция по эксплуатации - Страница 12

TROUBLESHOOTING

•  Check that the electricity supply has not been shut off.

•  If you are unable to turn the hob off after using it, disconnect it from the 

power supply.

•  If alphanumeric codes appear on the display when the hob is switched on, 

consult the following table for instructions.

Please note: The presence of water, liquid spilled from pots or any objects 

resting on any of the hob buttons can accidentally activate or deactivate 

the control panel lock function.

DISPLAY CODE

DESCRIPTION

POSSIBLE CAUSES

SOLUTION

F0E1

Cookware is detected, but it is not 

compatible with the requested 

operation.

The cookware is not well positioned on 

the cooking zone or is not compatible 

with one or more cooking zones.

Press On/Off button twice to remove the 

F0E1 code and restore the cooking zone's 

functionality. Then, try to use the cookware 

with a different cooking zone, or use 

different cookware.

F0E7 

Wrong power cord connection.

The power supply connection is not 

exactly as indicated in the “ELECTRICAL 

CONNECTION“ paragraph.

Adjust the power supply connection 

according to “ELECTRICAL CONNECTION“ 

paragraph.

F0EA 

The control panel switches off because 

of excessively high temperatures.

The internal temperature of the 

electronic parts is too high.

Wait for the hob to cool down before using 

it again.

F0E2, F0E4, F0E6, 

F0E8, F0EC, F1E1, 

F6E1, F7E5, F7E6

Disconnect the hob from the power supply. 

Wait a few seconds then reconnect the hob to the power supply.

If the problem persists, call the service centre and specify the error code that appears on the display. 

d E 

[when the hob is off]

The hob does not switch heat up.

The functions do not come on. 

DEMO MODE on.

Follow the instructions in the “DEMO 

MODE“ paragraph.

e.g.   

:

The hob does not allow a special 

function to be activated.

The power regulator limits the power 

levels in accordance with the maximum 

value set for the hob.

See paragraph “Power management“.

e.g.   

[Power level lower than 

level requested]

The hob automatically sets a minimum 

power level to ensure that the cooking 

zone can be used.

The power regulator limits the power 

levels in accordance with the maximum 

value set for the hob.

See paragraph “Power management“.

CLEANING AND MAINTENANCE

!

WARNING

•  Do not use steam cleaning equipment.

•  Before cleaning, make sure the cooking zones are switched off and that the residual heat indicator (“H“) is not displayed.

Important:

•  Do not use abrasive sponges or scouring pads as they may damage 

the glass.

•  After each use, clean the hob (when it is cool) to remove any deposits 

and stains from food residue.

•  A surface that is not kept suitably clean may reduce the sensitivity of 

control panel buttons.

•  Use a scraper only if residues are stuck to the hob. Follow the scraper 

manufacturer's instructions to avoid scratching the glass.

•  Sugar or foods with high sugar content can damage the hob and must 

be immediately removed.

•  Salt, sugar and sand could scratch the glass surface.

•  Use a soft cloth, absorbent kitchen paper or a special hob cleaner 

(follow the Manufacturer’s instructions).

•  Spills of liquid in the cooking zones can cause the pots to move or vibrate.

•  After cleaning the hob, dry thoroughly.

– 12 –