Ardesto IR-C2230 - Инструкция по эксплуатации - Страница 18

18

UA

EN

highest temperatures. If the selected temperature is too low, water may drip 

onto the plate.

SETTING SHOT-STEAM AND STEAM WHEN IRONING VERTICALLY

Press the shot-steam button (F) to generate a powerful burst of steam 

that can penetrate the fabrics and smooth the most difficult and 

tough creases. Wait for a few seconds before pressing again 

[Fig. 4]

.  

By pressing the shot-steam button at intervals you can also iron vertically 

(curtains, hung garments, etc.) 

[Fig. 5]

.

Warning:

the shot-steam function can only be used at high temperatures. 

Stop the emission when the plate temperature control light (G) comes on, than 

start ironing again only after the light has gone off.

DRY IRONING

To iron without steam, follow the instructions in section “steam ironing”, 

leaving the steam selector (D) on position “0FF”. 

SPRAY FUNCTION

Make sure that there is water in the reservoir. Press the spray button (E) 

slowly (for a dense spray) or quickly (for a vaporized spray) 

[Fig. 6]

. 

Warning:

 for delicate fabrics, we recommend moistening the fabric beforehand 

using the spray function (E), or putting a damp cloth between the iron and the 

fabric. To avoid staining, do not use the spray on silk or synthetic fabrics.

CLEANING

Please note: before cleaning the iron in any way, make 

sure that the appliance plug is not connected to the 

socket. 

Any deposits, starch residue or size left on the plate can be 

removed using a damp cloth or an unabrasive liquid detergent.  

Avoid scratching the plate with steel wool or metallic objects.  

The plastic parts can be cleaned with a damp cloth then 

wiped over with a dry cloth.

SELF-CLEANING

The self-cleaning feature cleans inside the plate, removing impurities. We 

recommend using it every 10-15 days. Directions: