Ryobi RBC1226i 5133002506 - Инструкция по эксплуатации - Страница 8

6

| English

■

Switch off and disconnect from the mains 

before conducting any maintenance or 

cleaning work.

■

You may make adjustments and repairs 

described here. For other repairs, contact 

the authorised service agent.

■

For the replacement line, use only nylon 

filament line of the diameter described in 

the specification table of this manual.

■

After extending the new cutter line, always 

return the product to its normal operating 

position before starting.

■

After each use, clean the product with a 

soft dry cloth. Any part that is damaged 

should be properly repaired or replaced by 

an authorised service centre.

■

Check all nuts, bolts, and screws at frequent 

intervals for proper tightness to ensure the 

product is in a safe working condition.

RESIDUAL RISKS

Even when the product is used as prescribed, 

it is still impossible to completely eliminate 

certain residual risk factors. The following 

hazards may arise in use and the operator 

should pay special attention to avoid the 

following:

–– Injury caused by vibration.
Hold the product by designated handles 

and restrict working time and exposure.
–– Injury caused by exposure to noise
Wear hearing protection and limit exposure.
–– Injury caused by flying debris
Wear eye protection at all times.

Contact with cutting means. Ensure that the 

blade protectors are 

fi

 tted when the machine 

is not in use. Keep hands and feet away from 

the blades at all times.
Kickback can occur when using the 

brushcutter. Ensure proper control by using 

both hands on the designated handles. Read 

and follow the directions elsewhere in this 

manual to help reduce the risk of kickback.
Risk of falling objects. During brush cutting, 

wear head protection if there is any risk of 

falling objects.

RISK REDUCTION

It has been reported that vibrations from 

handheld products may contribute to a 

condition called Raynaud’s Syndrome in 

certain individuals. Symptoms may include 

tingling, numbness, and blanching of the 

fi

 ngers, usually apparent upon exposure to 

cold. Hereditary factors, exposure to cold 

and dampness, diet, smoking, and work 

practices are all thought to contribute to the 

development of these symptoms. There are 

measures that can be taken by the operator to 

possibly reduce the effects of vibration:

■

Keep your body warm in cold weather. 

When operating the product, wear gloves 

to keep the hands and wrists warm. It is 

reported that cold weather is a major factor 

contributing to Raynaud’s Syndrome.

■

After each period of operation, exercise to 

increase blood circulation.

■

Take frequent work breaks. Limit the 

amount of exposure per day.

If you experience any of the symptoms of this 

condition, immediately discontinue use and 

see your doctor about these symptoms.

 WARNING

Injuries may be caused or aggravated by 

prolonged use of a tool. When using any 

tool for prolonged periods, ensure you take 

regular breaks.

KNOW YOUR PRODUCT

See page 205.

1. Rear 

handle

2. Lock-out 

trigger

3. Trigger

4. Front 

handle

5. Harness

6. Upper 

shaft

7. Lower 

shaft

8. Blade

9. Blade 

guard

10. Blade protector

11. Cord retainer

12. Power cord

13. Grass deflector

14. Cut-off blade

15. Cutting line

16. Bump head 

17. Spool cover

18. Spool

19. Eyelet