Ryobi RBC1226i 5133002506 - Инструкция по эксплуатации - Страница 7

5

 English 

|

EN

FR

DE

ES

IT

NL

PT

DA

SV

FI

NO

RU

PL

CS

HU

RO

LV

LT

ET

HR

SL

SK

BG

UK

authorised service centre.

BRUSHCUTTER SAFETY WARNINGS

■

In addition to the above rules, these 
additional instructions are appropriate 
when using the product in brushcutter 
mode.

■

Use heavy-duty gloves while installing or 
removing blades, they have sharp edges.

■

Do not attempt to touch or stop the blade 
when it is rotating.

■

A moving blade can cause severe injury. 
Maintain proper control of the machine with 
both hands until the blade has completely 
stopped rotating.

■

Replace any blade that has been damaged. 
Always make sure blade is installed 
correctly and securely fastened before 
each use.

■

Use only the manufacturer’s replacement 
Tri-Arc blade. Do not use any other cutting 
attachment.

■

Never cut any material over 13 mm 
diameter.

■

Your brushcutter is fitted with a harness. 
Carefully adjust the harness to fit 
comfortably and help to support the weight 
of the machine at your right side.

■

Identify the Quick Release mechanism 
and practice using it before you start using 
the product. Its correct use may prevent 
serious injury in case of an emergency. 
Never wear additional clothing over the 
harness or otherwise that restrict access to 
the quick release mechanism.

■

Cover the blade with the blade protector 
before storing the unit, or during 
transportation. Always remove the blade 
protector before using the unit. If not 
removed, the blade protector could become 
a thrown object as the blade begins to turn.

■

Exercise extreme caution when using the 
blade with this product. Blade thrust is the 
reaction that may occur when the spinning 
blade contacts anything it cannot cut. This 
contact may cause the blade to stop for an 
instant, and suddenly “thrust” the unit away 

from the object that was hit. This reaction 
can be violent enough to cause the 
operator to lose control of the unit. Blade 
thrust may occur without warning if the 
blade snags, stalls, or binds. This is more 
likely to occur in areas where it is difficult to 
see the material being cut.

■

For cutting ease and safety, approach the 
weeds being cut from the right to the left. 
In the event that an unexpected object or 
woody stock is encountered, this practice 
could minimize the blade thrust reaction. 
Both hands must be used at all times to 
control this product.

TRANSPORTATION AND STORAGE

■

Stop the product and allow it to cool before 

storing or transporting.

■

Clean all foreign materials from the product. 

If a cutting blade is fitted, cover it with the 

blade protector.

■

If a cutting blade is fitted, cover it with the 

blade protector.

■

For storage, always disconnect from power 

supply and wind the cable. Store it in a 

cool, dry and well-ventilated place that 

is inaccessible to children. Keep away 

from corrosive agents, such as garden 

chemicals and de-icing salts. Do not store 

outdoors.

■

For transportation, secure the product 

against movement or falling to prevent 

injury to persons or damage to the product.

MAINTENANCE

 WARNING

Use only original manufacturer’s 

replacement parts, accessories, and 

attachments. Failure to do so can cause 

possible injury, poor performance, and may 

void your warranty.

 WARNING

Servicing requires extreme care and 

knowledge and should be performed 

only be a quali

fi

 ed service technician. For 

service, we suggest you bring the product 

to your nearest authorised service centre for 

repair. When servicing, use only identical 

replacement parts.