Ryobi RBC1226i 5133002506 - Инструкция по эксплуатации - Страница 5

3

 English 

|

EN

FR

DE

ES

IT

NL

PT

DA

SV

FI

NO

RU

PL

CS

HU

RO

LV

LT

ET

HR

SL

SK

BG

UK

radiators, ranges and refrigerators.

There is an increased risk of electric shock 

if your body is earthed or grounded.

■

Do not expose power tools to rain or wet 

conditions.

 Water entering a power tool 

will increase the risk of electric shock.

■

Do not abuse the cord. Never use the 

cord for carrying, pulling or unplugging 

the power tool. Keep cord away from 

heat, oil, sharp edges or moving parts.

Damaged or entangled cords increase the 

risk of electric shock.

■

When operating a power tool outdoors, 

use an extension cord suitable for 

outdoor use.

 Use of a cord suitable for 

outdoor use reduces the risk of electric 

shock.

■

If operating a power tool in a damp 

location is unavoidable, use a residual 

current device (RCD) protected supply.

Use of an RCD reduces the risk of electric 

shock.

PERSONAL SAFETY

■

Stay alert, watch what you are doing and 

use common sense when operating a 

power tool. Do not use a power tool while 

you are tired or under the influence of 

drugs, alcohol or medication.

 A moment 

of inattention while operating power tools 

may result in serious personal injury.

■

Use personal protective equipment. 

Always wear eye protection.

 Protective 

equipment such as dust mask, non-skid 

safety shoes, hard hat or hearing protection 

used for appropriate conditions will reduce 

personal injuries.

■

Prevent unintentional starting. Ensure 

the switch is in the off-position before 

connecting to power source and/or 

battery pack, picking up or carrying the 

tool.

 Carrying power tools with your finger 

on the switch or energising power tools that 

have the switch on invites accidents.

■

Remove any adjusting key or wrench 

before turning the power tool on.

 A 

wrench or a key left attached to a rotating 

part of the power tool may result in personal 

injury.

■

Do not overreach. Keep proper 

footing and balance at all times.

 This 

enables better control of the power tool in 

unexpected situations.

■

Dress properly. Do not wear loose 

clothing or jewellery. Keep your hair, 

clothing and gloves away from moving 

parts.

 Loose clothes, jewellery or long hair 

can be caught in moving parts.

■

If devices are provided for the 

connection of dust extraction and 

collection facilities, ensure these are 

connected and properly used.

 Use of 

dust collection can reduce dust-related 

hazards.

POWER TOOL USE AND CARE

■

Do not force the power tool. Use the 

correct power tool for your application.

The correct power tool will do the job 

better and safer at the rate for which it was 

designed.

■

Do not use the power tool if the switch 

does not turn it on and off.

 Any power 

tool that cannot be controlled with the 

switch is dangerous and must be repaired.

■

Disconnect the plug from the power 

source and/or the battery pack from 

the power tool before making any 

adjustments, changing accessories or 

storing power tools.

 Such preventive 

safety measures reduce the risk of starting 

the power tool accidentally.

■

Store idle power tools out of the reach 

of children and do not allow persons 

unfamiliar with the power tool or these 

instructions to operate the power tool.

Power tools are dangerous in the hands of 

untrained users.

■

Maintain power tools. Check for 

misalignment or binding of moving 

parts, breakage of parts and any other 

condition that may affect the power 

tool’s operation. If damaged, have the 

power tool repaired before use. 

Many 

accidents are caused by poorly maintained 

power tools.

■

Keep cutting tools sharp and clean.

Properly maintained cutting tools with 

sharp cutting edges are less likely to bind 

and are easier to control.

■

Use the power tool, accessories and 

tool bits etc, in accordance with these 

instructions, taking into account the 

working conditions and the work to 

be performed.

 Use of the power tool for 

operations different from those intended