Makita DUR192LZ - Инструкция по эксплуатации - Страница 9

9 ENGLISH

ENGLISH (Original instructions)

SPECIFICATIONS

Model:

DUR192L

Type of handle

Loop handle

No load speed

2: 0 - 6,000 min

-1 

1: 0 - 4,500 min

-1

Overall length 

(without cutting tool)

1,670 mm

Nylon cord diameter

2.0 mm

Applicable cutting tool and 

cutting diameter

Nylon cutting head  

(P/N: 198893-8 / 191D89-4)

300 mm

Rated voltage

D.C. 18 V

Net weight

2.7 - 3.0 kg

• 

Due to our continuing program of research and development, the specifications herein are subject to change 

without notice.

• 

Specifications may differ from country to country.

• 

The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi

-

est combination, according to EPTA-Procedure 01/2014, are shown in the table.

Applicable battery cartridge and charger

Battery cartridge

BL1815N / BL1820B / BL1830B / BL1840B / BL1850B / BL1860B

Charger

DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF / 

DC18SH

• 

Some of the battery cartridges and chargers listed above may not be available depending on your region of 

residence.

WARNING:

Only use the battery cartridges and chargers listed above.

 Use of any other battery cartridges 

and chargers may cause injury and/or fire.

Recommended battery adapter

Battery adapter

PDC01

• 

The battery adapter(s) listed above may not be available depending on your region of residence.

• 

Before using the battery adapter, read instruction and cautionary markings on the battery adapter.

Noise

Cutting tool

Sound pressure level (L

PA

) 

dB(A)

Sound power level (L

WA

) 

dB(A)

Applicable 

standard

L

PA

 dB(A)

Uncer-

tainty (K)

dB(A)

L

WA

 dB(A)

Uncer-

tainty (K)

dB(A)

Nylon cutting head

74.8

0.4

87.8

1.9

ISO22868 

(ISO11806-1)/ 

EN50636-2-91

• 

Even if the sound pressure level listed above is 80 dB (A) or less, the level under working may exceed 80 dB 

(A). Wear ear protection.

NOTE:

 The declared noise emission value(s) has been measured in accordance with a standard test method and 

may be used for comparing one tool with another.

NOTE:

 The declared noise emission value(s) may also be used in a preliminary assessment of exposure.