Hitachi CG 40 EYA (TP) - Инструкция по эксплуатации - Страница 5

GB-3

Shows maximum shaft speed. Do not use the 
cutting attachment whose max rpm is below 
the shaft rpm.

Be careful of thrown objects.

Gloves should be worn when necessary, e. g., 
when assembling cutting equipment.

Use anti-slip and sturdy footwear.

Blade thrust may occur when the spinning 
blade contacts a solid object in the critical area. 
A dangerous reaction may occur causing the 
entire unit and operator to be thrust violently.
This reaction is called BLADE THRUST. As a 
result, the operator may lose control of the unit 
which may cause serious or fatal injury. Blade 
thrust is more likely to occur in areas where it is 
difficult to see the material to be cut.

Indicates handle location. Do not attach handle above this point.

D o   n o t   a t t a c h

h a n d l e   a b o v e

t h i s   p o i n t

Max

9,900rpm

Read the manual carefully.
Check that the cutting equipment is correctly assembled and adjusted.
Start the unit and check the carburetor adjustment. See "Maintenance".

Before using your machine

Read the Operator's Manual and follow all warnings and safety instructions. Failure to do so can result in serious injury to the operator 
and /or bystanders.
Objects may be thrown or ricochet in all directions. ALWAYS WEAR EYE PROTECTION.
Keep bystanders at least 50 feet (15m) away.
To reduce the chance of hearing loss, always wear ear protection.
To reduce the risk of injury from loss of control, never use a metal blade on a curved shaft grass trimmer. Never use a metal blade on any 
brushcutter without barrier bar or bicycle handle configuration and safety strap
Use of a blade may cause a sudden sideways, forward or backward motion of the brushcutter when the blade contacts a solid object. See 
Owner's manual for model specific details.

WARNING!