FERM GTM1005 - Инструкция по эксплуатации - Страница 11

11

EN

Tilting the trimmer head (Fig. H)

Please keep power switched off and 
disconnect the battery.

•   Press the knob (20) of the trimmer head to tilt 

the head in the desired position.

•   When knob is released, the head will click and 

lock in the chosen position.

Turning the trimmer head (Fig. I)

•   Press the ring (21) down towards the trimmer 

head to turn the head in the desired position.

•   When the ring is released, the head will click 

and lock in the chosen position.

Adjusting the pole height (Fig. J)

•   To adjust the height of the machine, loosen the 

lower adjustment ring (22).

•   Carefully push the lower shaft (24) from the 

upper shaft (23) down or upwards.

•   Fasten the lower adjustment ring (22) to secure 

the height of the machine.

Using your grass trimmer

Before use, always visually inspect the 
machine and its parts are correctly 
mounted, not worn out or damaged.

•   For your own safety and for best results read 

the following user advice and do not use this 
product for anything other than its intended 
purpose.

•   This grass trimmer is made for cutting grass. 

All other use that is not specifically allowed in 
this manual may lead to damage to the grass 
trimmer or injury to the user.

Safety features

•   The protection guard has a knife for cutting 

the wire to the correct length. Do not touch the 
knife to reduce the chance of injury to the user. 

•   The on/off switch (6) and safety switch (7) 

must be operated together to start the motor. 
If pressure on one of two switches is released, 
the tool is designed to stop rapidly.

Switching On and Off

•   To switch the trimmer on, press the safety 

switch (7) and the start on/off switch (6) at the 
same time.

•   To switch off, release one or both switches.

5. MAINTENANCE

 Before cleaning and maintenance, always 
switch off the machine and remove the 
battery pack from the machine.

Clean the machine casings regularly with a soft 
cloth, preferably after each use. Make sure that 
the ventilation openings are free of dust and 
dirt. Remove very persistent dirt using a soft 
cloth moistened with soapsuds. Do not use any 
solvents such as gasoline, alcohol, ammonia, 
etc. Chemicals such as these will damage the 
synthetic components.

ENVIRONMENT

Faulty and/or discarded electrical or 
electronic apparatus have to be collected 
at the appropriate recycling locations.

Only for EC countries

Do not dispose of power tools into domestic waste. 
According to the European Guideline 2012/19/EC for 
Waste Electrical and Electronic Equipment and its 
implementation into national right, power tools that 
are no longer usable must be collected separately and 
disposed of in an environmentally friendly way.

WARRANTY

FERM products are developed to the highest 
quality standards and are guaranteed free of 
defects in both materials and workmanship for the 
period lawfully stipulated starting from the date 
of original purchase. Should the product develop 
any failure during this period due to defective 
material and/or workmanship then contact your 
FERM dealer directly.

The following circumstances are excluded from
this guarantee:
•   Repairs and or alterations have been made 

or attempted to the machine by unauthorized 
service centers.

•   Normal wear and tear.
•   The tool has been abused, misused or 

improperly maintained.

•   Non-original spare parts have been used.