DEFORT DGT-1010N 98299328 - Инструкция по эксплуатации - Страница 10

10

GB

●

  Press the lock button and then the trigger to start the 

trimmer.

●

  The trimmer will build up speed steadily.

●

  Trim grass and weeds in a right-to-left motion with 

the line parallel to the ground.

Operating the brush cutter (

fi

 g. 11)

Hold the brush cutter with the right hand on the trigger 
handle and the left hand on the front handle. Keep a 

fi

 rm grip with both hands while in operation. Brush cut-

ter should be held a comfortable position yourself so 
that you will not be drawn off balance by the kick-back 
reaction of the cutting blade.
Adjust the shoulder strap to position the brush cutter at 
a comfortable operation position and to assure that the 
shoulder strap will reduce the risk of operator contact 
with the blade.
Exercise extreme caution when using the blade with 
this unit. Blade thrust is the reaction which may occur 
when the spinning blade contracts anything it cannot 
cut. This contact may cause the blade to stop for an 
instant, and suddenly “thrust” the unit away from the 
object that was hit. This reaction can be violent enough 
to cause the operator to lose control of the unit. Blade 
thrust may occur without warning if the blade snags, 
stalls or binds. This is more likely to occur in areas 
where it is dif

fi

 cult to see the material being cut. For 

cutting ease and safety, approach the weeds being 
cut from the right to the left. In the event that an unex-
pected object or woody stock is encountered, this could 
minimize the blade thrust reaction.

MAINTENANCE

Make sure that the machine is not live when carry-
ing out maintenance work on the motor!

Regularly clean the machine housing with a soft cloth, 
prefe rably after each use. Keep the ventilation slots 
free from dust and dirt. If the dirt does not come off 
use a soft cloth moistened with soapy water. Never use 
solvents such as petrol, alcohol, ammonia water, etc. 
These solvents may damage the plastic parts.
The machine requires no additional lubrication.
Should a fault occur, e.g. after wear of a part, please 
contact your local SBM Group dealer.

ENVIRONMENT

In order to prevent the machine from damage during 
transport, it is delivered in a sturdy packaging. Most of 
the packaging materials can be recycled. Take these 
materials to the appropriate recycling locations. Take 
your unwanted machines to your local SBM Group 
dealer. Here they will be disposed of in an environmen-
tally safe way.