TP-LINK RE605X AX1800 - Инструкция по эксплуатации - Страница 27

24

Chapter 5

Customize Your Network

5  2   Configure Wireless Network

If you want to extend another host network after Quick Setup, you can refer to this 
section. Moreover, you can change the wireless settings for your extended networks. 

Tip:

If the extender is in your router’s OneMesh network, it will automatically copy wireless settings from your router. No 
wireless settings is needed for the extender.

Visit 

http://tplinkrepeater.net

, and log in with your TP-Link ID or the password you set 

for the extender.

Note:

Here we take the configuration of the 2.4GHz network as an example. If the 5GHz network is available on your extender, 
please refer to the instructions to set your 5GHz network.

•  To extend another host network:

1. Go to 

Settings

 > 

Wireless

 > 

Connect to Network

.

2. Enable 

Connect to 2.4GHz Network

 and click 

Wireless Scanner

 to find all available 

networks.

3. Select the 2.4GHz host network you want to extend.

Note:

If the network you want to extend is on but not listed, please try the following steps.
· Move the extender closer to your router, and rescan for networks.
· You can manually enter the SSID (network name) and password of the network you want to extend, and click 

Save

.

4. Once a host network is selected, the SSID and security type will be automatically 

filled in. If the selected network is encrypted, enter the password in the 

Password 

field.