Brayer BR1090 (MULTI) - Инструкция по эксплуатации - Страница 9

9

EN

- control the tray (1) filling with water drops; when 

the tray (1) is filled up, remove it, drain water and 

install the tray (1) back to its place;

-

if you have not used the thermopot for a long time, 

the water dispense may malfunction. In this case it 

is recommended to open and close the lid (9) and 

to switch the water dispense on again.

• 

To switch the thermopot off press and hold the button 

(12) «Start/re-boil» for 5 seconds, take the plug of the 

power cord (8) out of the mains socket.

•  Remove the lid (9) (pic. 1) and allow complete 

cooling-down of the thermopot.

•  Tilt the thermopot and drain the remaining water, 

install the lid (9) back to its place and press the lock 

button (10) (pic. 1).

USAGE OF THERMOPOT

• 

Prepare the thermopot for operation, as specified in 

the previous section (fill with water, insert the power 

plug into the mains socket).

• 

Water heating up and keep warm modes selection 

• 

Press the button (12) «Start/re-boil» on the control 

panel (5), the indicator of the button (12) «Start/re-

boil» will light up, the symbol (27) «

» and the 

symbol (18) « » will light up, water will start heating 

up, the water temperature is shown with digital 

symbols (19).

• 

After water boiling the symbol (27) «

» will be 

flashing for 60 seconds, then it will go out, you will 

hear sound signals, the indicator of the button (12) 

«Start/re-boil» will go out as well, the thermopot will 

switch on in the keep warm mode, the hot water 

keeping temperature «85°C» is set by default.

• 

In the hot water keeping warm mode you can set the 

hot water keeping temperature for various beverages 

by pressing the button (13) «Temperature selection», 

the respective symbols (18) light up:

- « » - water boiling mode, water is heated up to 

the boil and digital symbols (19) «100°C» are 

shown.

- «

» - hot water keeping mode up to «95°C» 

for black tea brewing, the temperature «95°C» 

is set by default. To change the water heating up 

temperature use the buttons (24) «- … +», the 

range of temperature selection is from 87°C to 

95°C.

- « » - hot water keeping mode up to «85°C» 

for coffee brewing, the temperature «85°C» is 

set by default. To change the water heating up 

temperature use the buttons (24) «-/+», the range 

of temperature selection is from 80°C to 86°C.

- « » - hot water keeping mode up to «65°C» for 

making herbal tea, the temperature «65°C» is 

set by default. To change the water heating up 

temperature use the buttons (24) «-/+», the range 

of temperature selection is from 65°C to 79°C.