Brayer BR1090 (MULTI) - Инструкция по эксплуатации - Страница 11

11

EN

keeping warm mode for coffee brewing, the symbol 
(18) « » and digital symbols (20) «85°C» will light 

up.

• 

Where it is necessary to re-boil water, press the 

button (12) «Start/re-boil» on the control panel (5), 

the indicator of the button (12) «Start/re-boil» will light 

up, the symbol (27) «

» and the symbol (18) «

» will light up, water will start heating up, the water 

temperature is shown with digital symbols (19). After 

water boiling the symbol (27) «

» will be flashing 

for 60 seconds, then it will go out, you will hear sound 

signals, the indicator of the button (12) «Start/re-boil» 

will go out as well, the thermopot will switch on in the 

keep warm mode, the hot water keeping temperature 

«85°C» is set by default.

• 

To switch the thermopot off press and hold the button 

(12) «Start/re-boil» for 5 seconds, take the plug of the 

power cord (8) out of the mains socket.

Child lock

•  Use this function to protect children from hot water 

burns.

• 

To switch the child lock on, press and hold the 

«Lock» button (15) for 5 seconds, the indicator of 

the buttons (14) «Water dispense» and «Lock»  will 

light up.

• 

The button (14) «Water dispense» on the control 

panel (5) is inactive in the child lock condition.

• 

To switch the child lock off press and hold the button 

(15) «Lock» for 1 seconds, the indicators of the 

buttons (14) «Water dispense» and (15) «Lock» will 

light out.

• 

To switch the thermopot off press and hold the button 

(12) «Start/re-boil» for 5 seconds, unplug the unit.

CLEANING AND  MAINTENANCE

•  Before cleaning the thermopot unplug (8) it, remove 

the lid (9) and allow complete cooling-down of the 

thermopot. (pic. 1)

•  Always drain the remaining water from the thermopot 

flask, to do this remove the lid (9).

•  Carefully tilt the thermopot to drain the remaining 

water.

•  Remove the tray (1), remove the grid (2), pour the 

water out of the tray (1), wash the tray (1) and the 

grid (2). Place the grid (2) on the tray (1) and place 

the tray (1) on its installation place.

•  Clean the outer surface of the thermopot body (7) 

with a slightly damp cloth and then wipe it dry.

•  Use neutral detergents to remove dirt, do not use 

metal brushes, abrasives and solvents.

•  Do not immerse the thermopot and the power cord 

(20) into water or other liquids.

•  Do not put the thermopot in a dishwashing machine.

Stains on the inner surface of the thermopot flask

•  Water contains various minerals that can cause 

stains on the inner surface of the thermopot flask, the