Brayer BR1090 (MULTI) - Инструкция по эксплуатации - Страница 10

10 EN

Water cooling mode 

• 

Press the «Quick cooling» button (16), the symbol 

(22) « » will light up and will be flashing, the 

thermopot cooling fan will switch on. To switch the 

cooling mode off, press the «Quick cooling» button 

(16) again, the « » symbol (22) will go out.

Water level scale

• 

You can control the water level in the thermopot flask 

(6) with symbols (21):

- « » - the thermopot flask is filled with water by 

3/3 of its capacity.

- « » - the thermopot flask is filled by 2/3 of its 

capacity.

- « » - low water level, the thermopot flask is filled 

by 1/3 of its capacity, it is necessary to fill the 

thermopot flask with water, otherwise the heating 

element will not switch on. 

• 

Remove the lid (9), to do this, press the lid lock 

handle (10), take it and remove the lid (9) (pic. 1). Fill 

the thermopot with water using a suitable cookware, 

do not exceed the maximal water level mark «FULL» 

on the inner surface of the flask (6). Do not fill 

the thermopot directly from the faucet; to fill the 

thermopot use a suitable cookware (pic. 3).

•  The thermopot will switch on in the water boiling 

mode, after water boiling you will hear sound signals 

and the thermopot will be switched to the hot water 

- (26) «

»- hot water keeping mode up to 

«55°C», the temperature «55°C» is set by default. 

To change the water heating up temperature use 

the buttons (24) «-/+», the range of temperature 

selection is from 50°C to 64°C.

- (25) «

» - hot water keeping mode up to 

«45°C», the temperature «45°C» is set by default. 

To change the water heating up temperature use 

the buttons (24) «-/+», the range of temperature 

selection is from 40°C to 49°C.

Note: 

- when the hot water keeping warm is set below 

40°C, the symbols «- -» will be shown instead of 

digital symbols (20).

- (23) « » - switching on the long boiling mode, 

this mode is used to reduce the level of chlorine 

dissolved in water. In this mode water is heated up 

to 100°C, the symbol (27) «

» will be flashing, 

water will be boiling for 3 minutes, after that the 

symbol (27) «

» will go out, you will hear 

sound signals and the thermopot will be switched 

to the hot water keeping mode for coffee brewing 
(18) « », the water temperature «85°C» will be 

shown with symbols (20).

• 

Hot water keeping modes for black tea «

», coffee 

« », herbal tea « », water temperature in a range 

of 50-64 °C «

» and water temperature 40-49 °C 

«

» can be selected with buttons (24) «-/+».