Sony KDL-40(46)(55)X4500 - Инструкция по эксплуатации - Страница 54

54

 GB

No picture from the connected 
equipment appears on the 
screen.

• Turn the connected equipment on.
• Check the cable connection.
• Press 

 to display the list of inputs, then select the desired input.

• Correctly insert the memory card or other storage device in the digital 

still camera.

• Use a digital still camera memory card or other storage device that has 

been formatted according to the instruction manual supplied with the 
digital still camera.

• Operations are not guaranteed for all USB devices. Also, operations 

differ depending on the features of the USB device and the video being 
played.

You cannot select the 
connected equipment on the 
Home Menu or you cannot 
switch the input.

• Check the cable connection.
• Set the server to be displayed on the Home Menu (page 33).

Sound

The picture is good, but there 
is no sound.

• Press 

2

 +/–

 or 

%

 (Mute).

• Check if the “Speaker” is set to “TV Speaker” (page 42).
• When using HDMI input with Super Audio CD or DVD-Audio, 

DIGITAL AUDIO OUT (OPTICAL) may not output audio signals.

The sound from the external 
audio equipment such as an 
AV amplifier connected to the 
TV may be out of sync with 
the video.

• Adjust the timing of audio being output using the functions of the 

external audio equipment. If you sense that audio is still out of sync with 
the video, set “DRC Mode” to “Off” (page 37).

There is a significant 
difference in the output 
volume level between 
DIGITAL MEDIA PORT 
input and TV or other 
equipment input.

• Adjust “Volume Offset” setting in the “Sound” menu (page 38).

Channels

You cannot select your desired 
channel.

• Switch between digital and analogue mode, and select the desired 

digital/analogue channel.

Some channels are blank.

• The channel is for scrambled/subscription service only. Subscribe to a 

pay TV service.

• The channel is used only for data (no picture or sound).
• Contact the broadcaster for transmission details.

You cannot view digital 
channels.

• Contact a local installer to find out if digital transmissions are provided 

in your area.

• Upgrade to a higher gain aerial.

Home Network

Connection diagnostic results 
indicate a failure.

Check Connections

• Use a straight cable for the LAN cable.
• Check if the cable is connected firmly.
• Check the connection between the TV and the broadband router.

Check Settings

• Change the IP address for the DNS server (see “Checking the Network 

Connection” on page 33) while referring to the following.
– Contact your Internet service provider.
– Specify the IP address of the router if you do not know the DNS of 

your Internet service provider.

Condition

Explanation/Solution